Orbi WiFi 7 RBE973
Reply

Re: night hawk R7000p firmware upgrade failure

firestorm31
Aspirant

night hawk R7000p firmware upgrade failure

OS is Windows 10. I noticed that the nighthawk R7000P AC2300 had an firmware upgrade notice. the upgrade was for the 1.3.1.44 version.

 

I don't remember what the old version was , I know the last numbers were 1.23.

 

I closed out all the programs. went to the netgear gui on the taskbar and had clicked on prompts to download the firmware.

 

the download wasn't successful. it tells me that the d/l failed.

 

the red lights (power) were slowly blinking.

 

I have tried resetting it. did not work.

 

I have also tried to log on from the firefox browser using the www,routerlogin.net link. that did not work.

 

it appears that the router has been bricked.

Model: R7000P|Nighthawk AC2300 Smart WiFi Router with MU-MIMO
Message 1 of 6

Accepted Solutions

Re: night hawk R7000p firmware upgrade failure


@jetspeedz wrote:

tftp the firmware its not hard

 


Nor is it that easy:

 

How to upload firmware to a NETGEAR router using Windows TFTP | Answer | NETGEAR Support

 

Further guidance is out there in Googleland.

 

View solution in original post

Message 3 of 6

All Replies
jetspeedz
Luminary

Re: night hawk R7000p firmware upgrade failure

tftp the firmware its not hard

 

Message 2 of 6

Re: night hawk R7000p firmware upgrade failure


@jetspeedz wrote:

tftp the firmware its not hard

 


Nor is it that easy:

 

How to upload firmware to a NETGEAR router using Windows TFTP | Answer | NETGEAR Support

 

Further guidance is out there in Googleland.

 

Message 3 of 6
myersw
Master

Re: night hawk R7000p firmware upgrade failure

If you want even more fun do the tftp procedure on a MAC laptop. Need Ethernet USB dongle to start with. Smiley Happy

Message 4 of 6
firestorm31
Aspirant

Re: night hawk R7000p firmware upgrade failure

that link did the trick.

some of the other tips weren't clear or confusing on where to go to change the IP address.

that document could be a little bit more clearer on the setting of the TFTP IP address and on which router port to use during TFPT; that part wasn't clear also.

thanx.

Model: R7000P|Nighthawk AC2300 Smart WiFi Router with MU-MIMO
Message 5 of 6

Re: night hawk R7000p firmware upgrade failure


@firestorm31 wrote:

that link did the trick.



Not sure which link you mean – you haven't marked the relevant message as Solved –  but it is hard to disagree with this bit:

 



that document could be a little bit more clearer on the setting of the TFTP IP address and on which router port to use during TFPT; that part wasn't clear also.

 


TFTP isn't meant for amateurs like us. But it can be the only way out of a hole.

 

Glad it worked out in the end.

Message 6 of 6
Top Contributors
Discussion stats
  • 5 replies
  • 3569 views
  • 2 kudos
  • 4 in conversation
Announcements

Orbi WiFi 7