Discussion stats
  • 7 replies
  • 1151 views
  • 0 kudos
  • 4 in conversation
Announcements

Top Contributors
Reply
Highlighted
Aspirant

r7000p power blinking orange after failed update

I have read through some posts on this problem, is it just dead? it is just over a year old .

Model: R7000P|Nighthawk AC2300 Smart WiFi Dual Band Gigabit Router
Message 1 of 8

Accepted Solutions
Sensei

Re: r7000p power blinking orange after failed update

> I have read through some posts on this problem, [...]

 

   Think for a moment about how little useful unformation that
non-description conveys to the non-psychics in your audience.

 

> [...] is it just dead?

 

   Have you tried the TFTP recovery procedure?

 

      https://community.netgear.com/t5/x/x/m-p/1622096

View solution in original post

Message 2 of 8

All Replies
Sensei

Re: r7000p power blinking orange after failed update

> I have read through some posts on this problem, [...]

 

   Think for a moment about how little useful unformation that
non-description conveys to the non-psychics in your audience.

 

> [...] is it just dead?

 

   Have you tried the TFTP recovery procedure?

 

      https://community.netgear.com/t5/x/x/m-p/1622096

View solution in original post

Message 2 of 8
Highlighted
Aspirant

Re: r7000p power blinking orange after failed update

I have attempted it a couple of times, the links in the procedure do not work

Message 3 of 8
Highlighted
Sensei

Re: r7000p power blinking orange after failed update

> I have attempted it a couple of times, the links in the procedure do
> not work

 

   The TFTP recovery procedure is a multi-step procedure with many
variables, and many opportunities for user error.

 

   "attempted it" or "do not work" is not a useful problem description.
It does not say what you did.  It does not say what happened when you
did it.  As usual, showing actual actions with their actual results
(error messages, LED indicators, ...) can be more helpful than vague
descriptions or interpretations.

Message 4 of 8
Highlighted

Re: r7000p power blinking orange after failed update

It can take a little effort to get TFTP to work.

 

You might find it helpful to search for one of those YouTube videos:

 

unbrick my netgear router - Google Search

 

Take is slowly and pay attention to the exact details.

 

 

Just another user.

My network DM200 -> R7800 -> GS316 -> PL1000 -> Orbi RBR40 -> Orbi RBS50Y -> RBS40V
Message 5 of 8
Highlighted
Aspirant

Re: r7000p power blinking orange after failed update

Sorry to not be to your level. So I will give you the exact procedure I did .I took the piece of **bleep** Netgear threw it in the **bleep**ing trash and went and bought a Linksys. Is that detailed enough?
Message 6 of 8
Highlighted
Sensei

Re: r7000p power blinking orange after failed update

> [...] Is that detailed enough?

 

   It tells me all that I need to know.

Message 7 of 8
Highlighted
Master

Re: r7000p power blinking orange after failed update


@cmccaghren wrote:
Sorry to not be to your level. So I will give you the exact procedure I did .I took the piece of **bleep** Netgear threw it in the **bleep**ing trash and went and bought a Linksys. Is that detailed enough?

Hopefully you will have good luck with the Linksys. Every consumer grade router has firmware issues it seems. Cannot really check Asus forums for their 'normal' routers only their gaming routers. Others seem to have issues similar to NG. NG does not seem to be testing the firmware before pushing out IMHO. Almost like a it loads so ship it. 

--Bill
ISP Comcast, Modem-Netgear CM1150V, Router-Unifi Security Gateway-Pro4, AP-2 Unifi AP-LR
Tesla > Edison
Message 8 of 8