New - RAX35/38/40/42/43/45/50 Firmware Version 1.0.12.120 Released

james55408
Tutor
Apr 05, 2023
FURRYe38 wrote:
Which network is the Guest Network?

So Rays Phone and Ray TV, have you attempted to use the forget this network on these devices, then reboot them then have them re-connect to the Guest Network?
I Changed the password when I set up the router. so they had to be renewed. 'RaysWiFi' is the 5G Gust WiFi (not showen). He logs into 'RaysWiF' with the password and it connects him to James5G in the router, but his phone still says he is connected to RaysWiFi.

I have not tried to 'roll back' to the previous FW. I thought I would wait until they update it again.

James
- FURRYe38
  Guru - Experienced User
  Apr 06, 2023
  Ok,
  
  I tried on my RAX50v2 yesterday and not seeing same thing as you however I believe FW and such are different from the RAX50v1:
  
  I've asked someone that has a v1 to see if he can reproduce so we can get some additional information to NG. In mean time i recommend you downgrade FW if you need your other user to be on GN. We have no idea when this will get fixed and when a new version of FW will be forthcoming. So up to you if you want to wait it out or downgrade.
  - TC_in_Montana
    Virtuoso
    Apr 06, 2023
    james55408
    
    DarrenM
    
    FURRYe38
    
    I pulled my RAX50 (V1) out of the closet this morning, unplugged my RBRE960, and put the RAX50V1 online and configured it. The RAX50 is using the 1.0.12.120 firmware as noted by james55408
    
    I am able to recreate the issue that he is reporting. It appears to be an Access Control Screen Display issue only affecting the 5GHz Guest Network SSID.
    
    If I connect to the 2.4GHz Guest Network SSID and go to the Access Control Screen, the device shows as connected to the 2.4GHz Guest Network. However, the same device, when connected to the 5GHz Guest Network shows connected to 5GHz SSID, not the 5GHz GUEST Network SSID.
    
    Note that the connection shows correctly (either 2.4GHz Guest Network or 5GHz Guest Network) in the attached devices screen - it is only in the access control screen it is appearing incorrectly.
    
    Note also that I tested with "Allow Guests to See Each Other" enabled and disabled with the same results.

Forum Discussion

New - RAX35/38/40/42/43/45/50 Firmware Version 1.0.12.120 Released