NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RAX200 (AX12) weaker & slower than R7000 - (I've lost 70Mbs and WiFi is plop)
Hi Guys, Ive just installed my new AX12 router in the same place as my old R7000. The only thing ive changed is the SSIDs to what I had before so all network devices can work again. (I will change...
and now hopefully with screen shot
One last go...
I dont know why the image wont show, tried .png and .jpg and got it under 500kb...
Strangely tho.
Ive just tested the speed on the PS4 in the same office upstairs next to my MAC using the 5G network my mac is slower on.
It used to test between 130/160Mbs and now its on 210Mbs so fast than my old R7000
Photos have to be approved by a moderator. right now only the first one is showing.
channel 44 is only showing as 20hz wide on your scanner. that'd reduce its link speed from "up to 4800mbps" down to 600mbps.
4800=160hz
2400=80hz
1200=40hz
600=20hz
And thats in a 4x4 configuration. most wireless devices are only 2x2 antenna devices. Meaning your link speed would only be around 300mbps.
Plus your higher band is set at "up to 2400mbps" which is only 80 hz wide.
You can set the higher band up.
Not sure why the lower band is only broadcasting at 20hz wide.
What firmware version are you on?
Try setting the lower band to "up to 2400mbps" to see if it'll change to 80hz wide.
nevermind. was looking at the wrong network :)
the channel 44 is 160hz wide.
but try setting it down and changin gthe channel its broadcasting on.
