I recently configured my RAX40 (latest firmware) with VPN service and got me a ddns.net.
I marked "all sites on the Internet & Home Network" in the VPN Service configuration because I want to surf the web, via for example google chorme, with it.
I can, however though, access my local computers and can ping my router. All this from a laptop with windows 11.
I've copied the configfile from my router. A pretty basic one. Pasting it below:
"
client dev tap proto udp dev-node NETGEAR-VPN remote xxxxxxxx.ddns.net 12974 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key cipher AES-128-CBC comp-lzo verb 5
"
I can see a few errors in the log. But since I've just copied the config file created by netgear it should be any problems?
But I past them below anyway
2022-01-11 13:06:02 us=937000 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
Tue Jan 11 13:06:07 2022 OpenVPN ROUTE: OpenVPN needs a gateway parameter for a --route option and no default was specified by either --route-gateway or --ifconfig options Tue Jan 11 13:06:07 2022 OpenVPN ROUTE: failed to parse/resolve route for host/network: 192.168.1.0 Tue Jan 11 13:06:12 2022 NOTE: unable to redirect IPv4 default gateway -- VPN gateway parameter (--route-gateway or --ifconfig) is missing Tue Jan 11 13:06:12 2022 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Tue Jan 11 13:06:12 2022 AEAD Decrypt error: bad packet ID (may be a replay): [ #4 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings
Tue Jan 11 13:10:36 2022 write UDP: Unknown error (code=10051)
