RX200 Speed issue on Wlan 2

[ohusman]

Hi Netgear,

I just bought this router few days ago and why 5G WLAN 2 has a speed of 2400M.

also I have intel ax200 wifi pcie adapter. I have great signal strength.

but still has no more then 886 mb speed.

[ohusman]

Hardware Version	RAX200
Firmware Version	V1.0.3.106_1.0.58
GUI Language Version	V1.0.3.106_2.1.46.1
LAN Port
MAC Address	10:0C:6B:E1:15:16
IP Address	192.168.1.1
DHCP	On
CPU Load	CPU1: 1.55%  CPU2: 0.99% CPU3: 0.97%  CPU4: 0.97%
Memory Usage (Used/Total)	444MB/882MB
Flash Usage (Used/Total)	54.00MB/512.00MB

REB

[ohusman]

Hardware Version
RAX200

Firmware Version
V1.0.3.106_1.0.58

GUI Language Version
V1.0.3.106_2.1.46.1

LAN Port
MAC Address
10:0C:6B:E1:15:16

IP Address
192.168.1.1

DHCP
On
CPU Load
CPU1: 1.55% CPU2: 0.99%
CPU3: 0.97% CPU4: 0.97%

Memory Usage (Used/Total)
444MB/882MB

Flash Usage (Used/Total)
54.00MB/512.00MB

[Wolf_666]

On 2nd 5Ghz radio, since it uses DFS frequencies, could happen RAX200 drops some frequencies due to regulatory constraint. Same behavior as mine. 

[Wolf_666]

For more information: https://kb.netgear.com/000060371/What-is-Dynamic-Frequency-Selection-and-how-does-it-work-with-my-NE...