Reply

Re: RBK 852 Satellite Security Type: None

Bpasker
Tutor

RBK 852 Satellite Security Type: None

I have found that my wifi satellite is not secure on the satellite only on 5 ghz. I have tried to reset but when I do it creates a new wifi SID for my 2.4 on my satellite. You can see my mac connecting to this device and stating that it is not secure. I see in 2019 someone had this issue and fixed it with telnet. This is no longer an option so i'm not 100% clear what my next steps are. 

 

 

Network Settings:

RBR850_wireless.png

 

 

 

 

 

 

 

 

Satellite Status:

RBS850_wireless.png

 

 

 

 

 

 

 

Mac Connecting to Satellite:

mac.png

Message 1 of 15
FURRYe38
Guru

Re: RBK 852 Satellite Security Type: None

Please visit and post about this over in the Orbi AX forum:
https://community.netgear.com/t5/Orbi-AX/bd-p/en-home-orbi-ax

Thank you.

My Setup (Cable 1Gbps/50Mbps)>CM1200 v2.02.03(LAG Disabled)>RBK853 v3.2.18.223/SRK30 V3.2.33.106)
Additional NG HW: C7800/CM1100/CAX80/CM2000, Orbi CBK40, RBK50, R7800, R7960P, EX7500/EX7700, XR450(v2.3.2.120) and WNHDE111
Message 2 of 15
Bpasker
Tutor

Re: RBK 852 Satellite Security Type: None

 
Message 3 of 15
FURRYe38
Guru

Re: RBK 852 Satellite Security Type: None

https://community.netgear.com/t5/Orbi-AX/RBK-852-Satellite-Security-Type-None/td-p/2066752/jump-to/f...

My Setup (Cable 1Gbps/50Mbps)>CM1200 v2.02.03(LAG Disabled)>RBK853 v3.2.18.223/SRK30 V3.2.33.106)
Additional NG HW: C7800/CM1100/CAX80/CM2000, Orbi CBK40, RBK50, R7800, R7960P, EX7500/EX7700, XR450(v2.3.2.120) and WNHDE111
Message 4 of 15
CrimpOn
Sensei

Re: RBK 852 Satellite Security Type: None


@Bpasker wrote:

I have found that my wifi satellite is not secure on the satellite only on 5 ghz. I have tried to reset but when I do it creates a new wifi SID for my 2.4 on my satellite. You can see my mac connecting to this device and stating that it is not secure. I see in 2019 someone had this issue and fixed it with telnet. This is no longer an option so i'm not 100% clear what my next steps are. 


Images placed "in-line" using the Photo icon do not appear until approved by a forum moderator (which can take hours - or days).

So, we cannot see them (yet).

Images "attached" using the Browse button (in the lower left) are available immediately.

 

There is an issue with almost all consumer routers (including Orbi) that their web management interface is deemed "insecure" by modern browsers.

(a) http is by definition "insecure" because it is not encrypted. (b) Orbi's https web interface is also "insecure" because the SSL certificate is "self-signed".

 

There have been several (very long) posts about this issue.  The bottom line is "that's life. get over it."  The browser is saying, "I'm not absolutely certain you can trust that this web server is really your Orbi device" and my question is, "what the hell else can it be?" (a) it's on your internal LAN (not the internet) and (b) it only gives you access if you know the Orbi password.

I love my Orbi.
Message 5 of 15
Meon
Initiate

Re: RBK 852 Satellite Security Type: None

It happened to me twice: first time when I set it up a few months ago, and then I realized yesterday that the satellite was again broadcasting the 5Ghz without encryption. It might have been so for months before I noticed it.

 

This is such an incredibly major security issue... and I see it was already reported in 2019:

https://community.netgear.com/t5/Orbi/No-Security-5G-wifi-in-RBS40V-when-wired-synced/m-p/1841289

 

Chances are this will still be here in two years time, and chances are that there are thousands of Netgear customers offering free access to their private network to their neighbours and anyone passing by. This is really, really bad. The security basically just turns off on 5Ghz on the satellite... I did a factory reset, then resync, and this is secured again, but since I don't know that this issue will not be back in the future I think I'll just throw the entire expensive kit away. That is way too risky.

 

This is RBK753. I'm wired too and I have two switches between the AP router and the satellite (I'm using just one for now). I did the initial configuration before it was wired.

Model: RBK53|Orbi AC3000 Tri-band WiFi System
Message 6 of 15
FURRYe38
Guru

Re: RBK 852 Satellite Security Type: None

Netgear has set up a community forum specifically for the Orbi AX product. Most of the people who watch that forum are more likely to have experience with Orbi AX and know how to work it better than those of us who follow this "general Orbi" forum. Might be more likely to find someone who has a solution if the question is posted there:
https://community.netgear.com/t5/Orbi-AX/bd-p/en-home-orbi-ax

Thank you.


@Meon wrote:

It happened to me twice: first time when I set it up a few months ago, and then I realized yesterday that the satellite was again broadcasting the 5Ghz without encryption. It might have been so for months before I noticed it.

 

This is such an incredibly major security issue... and I see it was already reported in 2019:

https://community.netgear.com/t5/Orbi/No-Security-5G-wifi-in-RBS40V-when-wired-synced/m-p/1841289

 

Chances are this will still be here in two years time, and chances are that there are thousands of Netgear customers offering free access to their private network to their neighbours and anyone passing by. This is really, really bad. The security basically just turns off on 5Ghz on the satellite... I did a factory reset, then resync, and this is secured again, but since I don't know that this issue will not be back in the future I think I'll just throw the entire expensive kit away. That is way too risky.

 

This is RBK753. I'm wired too and I have two switches between the AP router and the satellite (I'm using just one for now). I did the initial configuration before it was wired.


 

My Setup (Cable 1Gbps/50Mbps)>CM1200 v2.02.03(LAG Disabled)>RBK853 v3.2.18.223/SRK30 V3.2.33.106)
Additional NG HW: C7800/CM1100/CAX80/CM2000, Orbi CBK40, RBK50, R7800, R7960P, EX7500/EX7700, XR450(v2.3.2.120) and WNHDE111
Message 7 of 15
vajim
Master

Re: RBK 852 Satellite Security Type: None


@FURRYe38 wrote:

Please visit and post about this over in the Orbi AX forum:
https://community.netgear.com/t5/Orbi-AX/bd-p/en-home-orbi-ax

Thank you.


Looks like they're ignoring you 

Message 8 of 15
FURRYe38
Guru

Re: RBK 852 Satellite Security Type: None

One of your links isn't working...

My Setup (Cable 1Gbps/50Mbps)>CM1200 v2.02.03(LAG Disabled)>RBK853 v3.2.18.223/SRK30 V3.2.33.106)
Additional NG HW: C7800/CM1100/CAX80/CM2000, Orbi CBK40, RBK50, R7800, R7960P, EX7500/EX7700, XR450(v2.3.2.120) and WNHDE111
Message 10 of 15
fangruoyuan
Guide

Re: RBK 852 Satellite Security Type: None

Message 11 of 15
FURRYe38
Guru

Re: RBK 852 Satellite Security Type: None

Any progress on this? 


@Meon wrote:

It happened to me twice: first time when I set it up a few months ago, and then I realized yesterday that the satellite was again broadcasting the 5Ghz without encryption. It might have been so for months before I noticed it.

 

This is such an incredibly major security issue... and I see it was already reported in 2019:

https://community.netgear.com/t5/Orbi/No-Security-5G-wifi-in-RBS40V-when-wired-synced/m-p/1841289

 

Chances are this will still be here in two years time, and chances are that there are thousands of Netgear customers offering free access to their private network to their neighbours and anyone passing by. This is really, really bad. The security basically just turns off on 5Ghz on the satellite... I did a factory reset, then resync, and this is secured again, but since I don't know that this issue will not be back in the future I think I'll just throw the entire expensive kit away. That is way too risky.

 

This is RBK753. I'm wired too and I have two switches between the AP router and the satellite (I'm using just one for now). I did the initial configuration before it was wired.


 

My Setup (Cable 1Gbps/50Mbps)>CM1200 v2.02.03(LAG Disabled)>RBK853 v3.2.18.223/SRK30 V3.2.33.106)
Additional NG HW: C7800/CM1100/CAX80/CM2000, Orbi CBK40, RBK50, R7800, R7960P, EX7500/EX7700, XR450(v2.3.2.120) and WNHDE111
Message 12 of 15
Meon
Initiate

Re: RBK 852 Satellite Security Type: None

Hi,

 

I have a 752 (actually, not 753 as I mentionned earlier) but I'm using only one satellite for now (I'll use the other one later). I have switched them and the other satellite does not reproduce the issue when wired. But the faulty one actually continues if I use it.

 

I've tried to factory reset the faulty one, and resync, but it was still showing "security: none" on 5Ghz (when wired).

 

I have not succeeded in syncing the faulty one over wifi for now but I'll give it another try.

 

Regards.

Message 13 of 15
FURRYe38
Guru

Re: RBK 852 Satellite Security Type: None

IF the one RBS does not sync correctly, wireless or wired, it'd contact NG support and ask about getting it replaced. 

 

Good Luck. 


@Meon wrote:

Hi,

 

I have a 752 (actually, not 753 as I mentionned earlier) but I'm using only one satellite for now (I'll use the other one later). I have switched them and the other satellite does not reproduce the issue when wired. But the faulty one actually continues if I use it.

 

I've tried to factory reset the faulty one, and resync, but it was still showing "security: none" on 5Ghz (when wired).

 

I have not succeeded in syncing the faulty one over wifi for now but I'll give it another try.

 

Regards.


 

My Setup (Cable 1Gbps/50Mbps)>CM1200 v2.02.03(LAG Disabled)>RBK853 v3.2.18.223/SRK30 V3.2.33.106)
Additional NG HW: C7800/CM1100/CAX80/CM2000, Orbi CBK40, RBK50, R7800, R7960P, EX7500/EX7700, XR450(v2.3.2.120) and WNHDE111
Message 14 of 15
vajim
Master

Re: RBK 852 Satellite Security Type: None


@FURRYe38 wrote:

IF the one RBS does not sync correctly, wireless or wired, it'd contact NG support and ask about getting it replaced. 

 

is it still under warranty?

Message 15 of 15
Top Contributors
Discussion stats
  • 14 replies
  • 376 views
  • 1 kudo
  • 6 in conversation
Announcements