Same problem here. App can't find the base station, not from wifi nor external access. Going directly to the ip address with browser fails, albeit while connected to wifi. I ran a ports scan and it reports 53 (dns), 80 (http), and 443 (https) are up.
Same problem here. App can't find the base station, not from wifi nor external access. Going directly to the ip address with browser fails, albeit while connected to wifi. I ran a ports scan and it reports 53 (dns), 80 (http), and 443 (https) are up.
$ wget 10.0.0.1 Connecting to 10.0.0.1:80... failed: Connection refused.
Looks like a firmware update 4.6.8.2 (Last Updated:04/27/2022). A LOT of people started having problems after this.
One of the new 'features' added in this release looks suspect.
Removes the remote management feature from the router web interface (if disabled at time of update) to improve router security.
Same problem here. App can't find the base station, not from wifi nor external access. Going directly to the ip address with browser fails, albeit while connected to wifi. I ran a ports scan and it reports 53 (dns), 80 (http), and 443 (https) are up.
$ wget 10.0.0.1 Connecting to 10.0.0.1:80... failed: Connection refused.
Looks like a firmware update 4.6.8.2 (Last Updated:04/27/2022). A LOT of people started having problems after this.
One of the new 'features' added in this release looks suspect.
Removes the remote management feature from the router web interface (if disabled at time of update) to improve router security.
Same problem here. App can't find the base station, not from wifi nor external access. Going directly to the ip address with browser fails, albeit while connected to wifi. I ran a ports scan and it reports 53 (dns), 80 (http), and 443 (https) are up.
DONE: Disable WiFi Private IP address and Limit IP Address Tracking on any Apple phones or pads.
$ wget 10.0.0.1 Connecting to 10.0.0.1:80... failed: Connection refused.
MODEL: RBK852
Looks like a firmware update 4.6.8.2 (Last Updated:04/27/2022). A LOT of people started having problems after this.
One of the new 'features' added in this release looks suspect.
Removes the remote management feature from the router web interface (if disabled at time of update) to improve router security.
Not a solution for me. I use firefox, no private relay.
Same problem here. App can't find the base station, not from wifi nor remote access. Going directly to the ip address with browser fails, albeit while connected to wifi. I ran a ports scan and it reports 53 (dns), 80 (http), and 443 (https) are up.
DONE: Disable WiFi Private IP address and Limit IP Address Tracking on any Apple phones or pads.
$ wget 10.0.0.1 Connecting to 10.0.0.1:80... failed: Connection refused.
MODEL: RBK852
Looks like a firmware update 4.6.8.2 (Last Updated:04/27/2022). A LOT of people started having problems after this.
One of the new 'features' added in this release looks suspect.
Removes the remote management feature from the router web interface (if disabled at time of update) to improve router security.
I hope there are some Netgear people on here and they will research and release a firmware fix. This of course would only fix for those of us that have the device configured to auto-firmware updates.
I had to relocate my satellite. Seems it has a hard problem reconnecting. (flashing light) I re-powered the base station and the flashing light went away. I have no way of confirming it's connected though without access to the device.
Agreed. One thing for sure, I’m going to monitor community forums related to all m apps before I install updates again. I could’ve avoided this on-going pain and inconvenience. I’m grateful for lessons learned each time I get burned.
