NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Orbi app doesn't show 2 satellites in the Network Map
I upgraded my router from a RBR750 to a RBR860. Router setup is complete with no issues. I added the 2 satellites from the 750 system (RBS750) and based on the WiFi Analytics tab in the Orbi app, the...
Ok for that size of home, only one RBR and maybe one RBS would be needed. And run the RBR power setting at 25% at that as well. You don't need any additional RBS. Too Much Wifi: https://youtu.be/UR0viMLISz4
What is the size of your home? Sq Ft?
What is the distance between the router and 📡 satellite(s)? 30 feet or more is recommended in between RBR and RBS🛰️ to begin with depending upon building materials when wirelessly connected.
https://kb.netgear.com/31029/Where-should-I-place-my-Orbi-satellite 🛰️
We asked NG about what RBS are compatible between 7, 8 and 9 series system.
Though we found in our own testing 7 and 8s worked with 9 series, NG hasn't done any official testing between models as of yet to get official support results. So for some, they may or may not work and if they do work, may not be fully compatible across the system or app. Sounds like in this case the Orbi app and web page are not tuned fully for mixed model RBS being connected and not sure if or when that would happen.
The house is 1900 sq feet, not counting the 24x24 garage. It appears the satellites are working even though they don't show up on the network map. I see how things turn when I add the 860 satellite later this week.
Ok for that size of home, only one RBR and maybe one RBS would be needed. And run the RBR power setting at 25% at that as well. You don't need any additional RBS. Too Much Wifi: https://youtu.be/UR0viMLISz4
Ok, I'll look into that.
Thanks,
Greg
Would there by chance be a device handy that can connect to one of the Ethernet ports on a RBS750 satellite?
I find the information to be conflicting:
- Netgear's published table says the 750 satellites are not compatible with the 860 router.
The table could be simply inaccurate.
Some aspects of the devices may be compatible, but not totally compatible.
(They seem pretty comfortable with footnotes (RBS40V and RBS50Y), so why not a footnote about that?) - A WiFi Analyzer app shows three devices broadcasting the same SSID on channel 48.
- Neither the web Attached Devices nor the app Connected Devices show the two satellites as connected.
- (This is a guess, but) neither the web Attached Devices nor the app Connected Devices show any specific devices connected to either of the two satellites. (True? False?)
- So, it would be handy to have more confidence that things are connected to these satellites and reaching the network.
For example, connect something to an Ethernet port on a satellite and
- See if it gets an IP address and can reach the internet.
- See how Attached Devices and Connected Devices describe the connection.
Good call, About CrimpOn - NETGEAR Communities
I took one of the 750 satellites and hooked it up to my desktop.
And run a speed test. So yes to your point, it appears the 750 satellites are compatible with the 860 routers.
- Netgear's published table says the 750 satellites are not compatible with the 860 router.
