- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
Re: Switch from router mode to ap mode?
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I've a Orbi Pro setup here with following specs:
Mode: Router
WAN: 192.168.0.0/16
WLAN1: Active
WLAN2: Active
Guest-WLAN: Active
LAN config: 10.0.0.0/24
When I now switch to AP Mode, what happens to the 3 WLAN setups? How can I seperate after switch, wifi guest users from "normal" users in my network?
Solved! Go to Solution.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi kromonos,
The configuration of the WLAN will still be there. The only thing that will be changed is that the DHCP/NAT function will be handled by your Router and also the gateway. The Orbi Pro has its own wireless separation from the Guest network to ensure that they cannot access anything inside your network.
Welcome to our community! 🙂
Regards,
John
NETGEAR Community Team
All Replies
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi kromonos,
The configuration of the WLAN will still be there. The only thing that will be changed is that the DHCP/NAT function will be handled by your Router and also the gateway. The Orbi Pro has its own wireless separation from the Guest network to ensure that they cannot access anything inside your network.
Welcome to our community! 🙂
Regards,
John
NETGEAR Community Team