NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Ethernet backhaul cause satellite to disappear and everything connected to router
I have RBK752 in AP mode connected to my existing network and everything is fine. The issue starts when I connected the satellite for ethernet backhaul. What happened was I cannot see the satelli...
Yes, any RBS ethernet connected, switch or not, needs to be connected behind the RBR. Router or AP mode.
Yes, any RBS ethernet connected, switch or not, needs to be connected behind the RBR. Router or AP mode.
Apparently so. I just got confused with the 3rd example in here though.
I'm trying this configuration but it does not work. Would love to get this to work since I can play with placement of the RBR more as only 1 cable involved.
So the 3rd picture with switch is not working in that configuration? I thought you said it was working in your previous post?
This is the configuration following that 3rd picture which doesn't work.
RBR < C3150v2 > SG108E > RBS
I have ethernet backhaul working by unplugging the SG108E from C150v2 and connect it direct to RBR.
C3150v2 > RBR > SG108E > RBS
Ok, Thats the only configuration that will work for etherent connected RBS with switch(s).
Yeah, I guess I can't use the main router as a switch for ethernet backhaul, it must be directly connected to RBR or through an actual switch which connects both of them and not parallel.
Ya you can't use that configuration. Gotta be directly behind the RBR in series.