Thanks for the suggestions. Believe I initiated updates from the Orbi app, no idea if i did RBR first before satellite. What happens if I did the satellite first? Seems insane that there'd be a requirement for them to be updated in a specific order and then no UI to tell me that. It's 2022, shouldn't need a support page for how to update firmware. That's a complaint to netgear, though, not you. 🙂
I use the internal updater to download and upgrade. I don't know what order it uses. If there is a specific order, then it Netgear should enforce that.
Re: New - RBR750/RBS750 Firmware Version 4.6.9.11 Released
I mean all of it is a horrid user experience. That’s enough of a reason for them to spend cycles on fixing it. If it’s an issue for years, why not fix it? If the app is a problem, why not fix it?
If “this is just how it is and we should get used to imperfection”, I’ll just leave Netgear for a company that gives a crap about the quality of their products. Again, something like this shouldn’t require reading a manual for a bunch of specific, detailed upgrade steps. Baffling that it’s accepted as “will not ever be perfect”.
Re: New - RBR750/RBS750 Firmware Version 4.6.9.11 Released
You can complain and voice your concerns however this forum is mostly supported by experienced users and other users who give help and support information on getting problems fixed. Anything beyond that is beyond forum help. Something you'll need to open a support ticket for with NG support.
Other factors may also be involved as well in regards to FW updates and the condition of your system. I've found that even if the RBS are placed too far from the RBR, this maybe one condition what would lead to bad experienced in FW updates. There maybe other odd issues that we can't all cover as not everyone has the same configuration or environment. So there maybe odd issues seen with different users. Not everyone has seen this problem while other may.
NG has implemented giving users more control on FW updates now and we recommend taking advantage of this. User have been asking about this for years.
IF your new to Orbi and FW updates then its not your fault about FW update, recommended process and methods and would be a learning experience for you.
Over all, were just here to help if we can. If not, you'll need to contact NG support.
Re: New - RBR750/RBS750 Firmware Version 4.6.9.11 Released
Thank you. I do appreciate the assistance, especially from someone seemingly not on staff with them. Appreciate your time and expertise, particularly through my ranting.
Re: New - RBR750/RBS750 Firmware Version 4.6.9.11 Released
My satellite is definitely bricked. Flashing white to pulsing white. Never changes and I've run through every reset possible with it. No matter what process I performed it never fully resets and never shows up even if plugged into the router itself.
I can't even get it to show up anywhere to tftp the firmware file in. Am I screwed and now need with support to replace it or just to go back and return the whole pile of junk to costco?
Re: New - RBR750/RBS750 Firmware Version 4.6.9.11 Released
Does the RBS appear at any time with a valid IP address if you ethernet connect it to the back of the RBR? Factory reset it then see if it will appear on the RBRs web page.
Can reach out to a forum moderator or take it back and get another if that's needed.
Re: New - RBR750/RBS750 Firmware Version 4.6.9.11 Released
This past week I upgraded to fiber optic from cable internet service, getting excellent download/upload speeds of 900+ Mbps. Updated firmware 4.6.9.11 has helped several of my devices connect to the closest unit (router or satellite).
I also setup a network rack in my unfinished basement area and moved a majority of my IoT hubs to the rack all connected via Ethernet. I think placement is the big key in allocating the WiFi connections around my home and having relocated the router and 2 satellites I have a more overall consistency with coverage now.
Re: New - RBR750/RBS750 Firmware Version 4.6.9.11 Released
Still on the fence on this one, just got my RBR750 and loving the speeds and connectivity, but hearing some move to this firmware and decreased coverage makes me hesitate…is that still an issue for ya’ll?
Still on the fence on this one, just got my RBR750 and loving the speeds and connectivity, but hearing some move to this firmware and decreased coverage makes me hesitate…is that still an issue for ya’ll?
I also setup a network rack in my unfinished basement area and moved a majority of my IoT hubs to the rack all connected via Ethernet. I think placement is the big key in allocating the WiFi connections around my home and having relocated the router and 2 satellites I have a more overall consistency with coverage now.
Re: New - RBR750/RBS750 Firmware Version 4.6.9.11 Released
I’m finding significant lag in this update on my RBK753 system, causing several seconds’ worth of hold when I try to access the Internet on my devices — once the connection is made, the page/app loads quickly, but getting to that connection is taking several seconds, like when I bring up the Apple App Store on my iDevices, I get a spinning wheel with “LOADING” for at least 6-10 seconds before the App Store presents. I had initially attributed it to the iOS and iPadOS updates I’d made, but I’m at my mother’s house using her Xfinity WiFi modem/router, and while her Internet speeds are half what I have at home, the response/load time is within 1-3 seconds.
I have a Motorola MB8600 cable modem at home, and yes, I’ve rebooted the modem several times and factory reset the Orbi system after installing this update.
I’m finding significant lag in this update on my RBK753 system, causing several seconds’ worth of hold when I try to access the Internet on my devices — once the connection is made, the page/app loads quickly, but getting to that connection is taking several seconds, like when I bring up the Apple App Store on my iDevices, I get a spinning wheel with “LOADING” for at least 6-10 seconds before the App Store presents. I had initially attributed it to the iOS and iPadOS updates I’d made, but I’m at my mother’s house using her Xfinity WiFi modem/router, and while her Internet speeds are half what I have at home, the response/load time is within 1-3 seconds.
I have a Motorola MB8600 cable modem at home, and yes, I’ve rebooted the modem several times and factory reset the Orbi system after installing this update.
I’m finding significant lag in this update on my RBK753 system, causing several seconds’ worth of hold when I try to access the Internet on my devices — once the connection is made, the page/app loads quickly, but getting to that connection is taking several seconds, like when I bring up the Apple App Store on my iDevices, I get a spinning wheel with “LOADING” for at least 6-10 seconds before the App Store presents. I had initially attributed it to the iOS and iPadOS updates I’d made, but I’m at my mother’s house using her Xfinity WiFi modem/router, and while her Internet speeds are half what I have at home, the response/load time is within 1-3 seconds.
I have a Motorola MB8600 cable modem at home, and yes, I’ve rebooted the modem several times and factory reset the Orbi system after installing this update.
Yes, happens when the RBS satellites are unplugged and only the RBR is running.
Private WiFi addresses are turned off, but the lag remains.
Private WiFi addresses are turned off, but the lag remains.
Sorry for the delay in response, was down for a couple of days due to COVID booster dose.
FW was loaded on the RBR and RBS via web browser upload, connected by Ethernet at the time.
After the factory reset, I pretty much kept things as-is -- didn't even enable the Guest network. The only thing I did enable was dual-band 2.4GHz and 5GHz.
Re: New - RBR750/RBS750 Firmware Version 4.6.9.11 Released
Good morning! On Friday my rbk753 system updated itself to version 4.6.9.11 before I had version 4.6.8.5 which worked fine fine. Now I have noticed that you can see the NETGEAR-guest network but I have NEVER activated it. It is also without wpa2 protection etc. I tried to connect and my phone does not connect to the guest network which I have never activated. Why do you see the NETGEAR-guest network? thanks for the replies.
Re: New - RBR750/RBS750 Firmware Version 4.6.9.11 Released
Are the RBS updated as well to same version of FW?
Has a power off for 1 minute then back ON with the ISP modem and router been performed since last update? Be sure to restart your network in this sequence: Turn off and unplug modem. Turn off router and computers. Plug in and turn on modem. Wait 2 minutes for it to connect. Turn on the router and wait 2 minutes for it to connect. Turn on computers and rest of network.
Has a factory reset and setup from scratch been performed since last FW update?
