NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
New - RBR750 / RBS750 Firmware Version 7.2.6.21 Released
New Features: 09/08/2023
Supports Separate SSID IoT network.
https://kb.netgear.com/000064267/How-do-I-enable-or-disable-the-Internet-of-things-IoT-network-on-my-Orbi-WiFi-6E-System
https:/...
Followed the directions and upgraded. Did the RBS750 units first and then the RBR750. Appears to be working well.
One important note, I did need to restart each RBS750 after the RBR750 was upgraded to re-establish connection. As each is on a UPS and mounted on the all, required a ladder.
Otherwise working fine at this time.
I didn't see the "IoT" network feature at first. You need to go into Wireless setup. You'll then see a "Wireless IoT Settings' and the ability to "enable" an IoT wireless SSID along with password.
Nice to have this feature added finally. I believe it's important to have a Trusted, IoT and Guest wireless SSID.
Want to update to 7.2.6.21 but have a few questions:
1) Does this firmware update solve the "random blue light on the Sat" issue? (Since 4.6.14.3_2.3.12, I've had the blue light illuminate on the sats for no reason with no degradation in my system so it is merely annoying versus detrimental.)
2) Is it still recommended to set IP reservations to 192.168.x.1xx?
3) Any other problems noted so far?
Thanks!
tucsontico wrote:2) Is it still recommended to set IP reservations to 192.168.x.1xx?
tucsontico wrote:Got it. Do the sats need to be in the IP address range of 192.168.x.100-200 as well?
This sounds like another case of Orbi voodoo magic that has somehow become forum knowledge because someone at some point changed things randomly in desperation and something started working for no good reason.
You should be able to use any IP range you wish, but of course stick to 10.*.*.*, 172.16.*.* to 172.31.*.* or 192.168.*.* unless you want to risk your internet being broken.
Personally, I tend to use 10.1.1.* because it is easy to type and easy to remember.
Users can use what ever they'd like. Just recommendations is all or for troubleshooting problems.
I personally use the smaller pool size. Been using it for years. Zero issues.
Up to users though.
Good Luck.
