NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Only 1 entry shows in log
This is an odd quesiton...my RBR850 router and satellites installation is about a week old, running well...but one odd thing I noticed, I only ever have 1 entry in the log file that shows. Now, the o...
Anything is possible. Hopefully they can figure it out.
Mines connected to a CM series modem only cable modem. SparkLight ISP.
RBR is in router mode. RBS both ethernet connected behind RBR via GB switches.
Using a 192.168.0.100 to .150 Default DHCP IP address pool.
Auto DNS detect.
CTS 64
20/40Mhz.
No Armor enabled.
Opera Browser.
Here is my config:
Comcast ISP -> CM1200 -> Orbi RBR8500. 2 RBS8500's. No other network hardware - no switches, DHCP servers, etc.
RBR is in router mode (But get this - for the first time, I brought up orbilogin.net, logged in, and as I went to Advanced to see Router/AP Mode, it's grayed out! Have oyu ever seen that?)
All defaults for DHCP address pool, Router acts as DHCP.
CTS 2347 on 2.4 and 5GHz (0 collisions still!)
20/40 MHz
No Armor, no Guest network, UPnP on, IPv6 enabled, no bridges, VPNs, static routes, port forwarding/triggering.
Remote management turned off.
Well maybe you have the wrong forum for your RBR8500 and RBS8500. LOL. Kidding.
Haven't see any probems with Router or AP mode:
Have you factory reset your RBR since last update?
What browser are you using for the RBRs web page? I'm use Opera Next.
I don't have IPv6 enabled since my ISP doesn't support it natively.
I have about 30 devices online, wireless phones, wired PCs, wired NAS, 3 wired printers, 4 wireless cameras, DISH Hopper system and 2 wired Joeys and 3 xbox consoles.
FURRYe38 I think I have 15 devices online - printers, laptops, iPad, iPhones, hubs, Apple TVs, TVs.
I have not done a factory reset since the last update. The documentation didn't say I had to, do I? That seems like a lot of work starting over?
I tried Safari and Chrome - grayed out. Seems like some new little thing pops up every other day lol. I have seen your graphic a lot, just stopped being available now. Maybe because I went to LAG today? I bet that is it!
Well the LAG on the CM1200 got new FW from those ISPs that pushed that is supposed to fix LAG slow down.
Yes if you enabled LAG on the RBR, then maybe AP mode is disabled from use untill LAG is disabled on the RBR. I think I remember that now.
I bet AP mode will be availalble when LAG is disabled. :smileywink: