NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RBK852 query on backhaul status
I have a fibre connection to my Orbi system 300 DL 50 UL and my system is configured as such.. Router - wireless to Sat 1 which is subsequently wired to Sat 2, Sat 2 is not in wireless range of e...
Sounds like the signal and status is right on the boarder of good and poor and where your debarcation is for the ethernet to the RBS2. You can possible extend the LAN cable from the newer location of RBS1 to the wall jack? Or is this one cable out to the RBS2 one long length?
There are simple LAN cable barrel connectors that would work as well to add on a longer cable section to whats in place now so you can move the RBS1 to the better location.
What is the distance between the router and 📡 satellite(s)?
What Firmware version is currently loaded?
about 35 ft from router to Sat 1 and then another 50ft on to sat 2 from sat 1. Is the router somehow getting confused as to wireless from Sat 2?
i will switch off sat 2 and see if the backhaul status changes and report back..