This topic has been marked solved and closed to new posts due to inactivity. We hope you'll join the conversation by posting to an open topic or starting a new one.
I have an RBR860 with 3 satellites that were working great. Today I noticed that in my app the satellites all appear as offline but are still transmitting fine. I went into the web interface for each satellite and they show all connected.
I then went into the web interface for the router and see it also shows the satellites as offline. I tried removing it me satellite and factory resetting it and then pairing it with router again. While I was able to pair it, and my Status page on the router web interface shows 3 satellites, when I then go into attached devices in the web interface I now only see 2 satellites ( and those 2 are still both offline).
I tried rebooting router with no change.
Everything is working so not sure what is going on.
@Beantowm111 wrote: I have an RBR860 with 3 satellites that were working great. Today I noticed that in my app the satellites all appear as offline but are still transmitting fine. I went into the web interface for each satellite and they show all connected.
While many questions about routers are generic and could be answered anywhere, some things need specialist knowledge.
You might get more help, and find earlier questions and answers specific to your device, in the appropriate section for your hardware. That's probably here:
what firmware is on the router and the satellites?
Everything's working fine other than its not displaying properly?
Current setup: CM2000-> RBKE963B-> Trendnet TEG-S380-> GS716T-> pi-hole also in AP setup: RAXE500->EAX80 1.4gig download/50mbps upload from Xfinity We’re members of the public helping out on our own time.
