NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
an RBS850 satellite has specific password
I am facing a strange issue, One of my two RBS850 satellites, properly connected to the RBR850, has a misaligned consolde password: it is still based on default "admin/password" (not admin/admin) ...
THey are properly aligned on the last official firmware: V4.6.3.16_2.0.51
I am not willing to do a factory reset of the router due to a rather complex configuration that would be tedious and disruptive to redo.
I may however try to remove/resync the satellite itself, as some have report this as resolving such disync issue. Alternatively, I could keep it as such as everything seems to work for the rest ...hoping the next firmware update (apparentely on its way) would resolve it.
sorry, didn't mean a factory reset of router, just the satellite.
I'd try that first.
I didn't try yet but took note of the recommended solution to "turn-off atellite, remove satellite from admin console of router, then re-add satellite)
I will confirm if it works when i find the time to test the procedureI just did try:
- I removed the satellite
- I turned on then pressed the reset button of the satellite until the small LED next to id became green again
- I wanted to re-add the satellite but the procedure was not 100% as axpeced: the satellite never came to a stable white color before I could press sync: it was slowly blinking (fade-in/fade-out)
- eventually, I pressed sync on the router then on satellite and it became fixed blue
...but the password of the satellite console is still the default admin/password, and strangely the router "remembered its name"
So I have the feeling that the satellite actually reconnected and sync'ed in the very same situation. Unresolved.
One hint: I wonder whether the satellite could have connected in "daisy chain mode" first before it switched to the most rapide 5G to the router from which it stands.What does the status for the RBS say on the RBRs web page? If it says Out Of Sync, then this maybe one reason why the RBS PW hasn't changed to same as the RBR.
When you re-synced the RBS, did you try in same room as the RBR when you pressed the sync button on the RBS and RBR?
