BRS_wanlan_conflict.html with orbi - and connecting to webpages with often 404 (page exists)

---

FURRYe38 wrote:

Your ISP modem will already have a built in router. This would be a double NAT condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop 

---

greenkaczka wrote:

ATT modem (uverse)

Orbi.

connect the orbi to ATT directly per instruction.

When my Orbi system is used I often get a pop-up message which asks for  login information to websites, or message that says no such webpage exist

The web adress is followed by - BRS_wanlan_conflict.html

It prevents me from using certain webpages.

 

FOUND NO SOLUTION ON COMMUNITY.

---

 

---

Thank you!!!!!!!!  Following the Orbi manual instructions on setting the Orbi router to AP mode SOLVED THE PROBLEM. The hardest part was remembering my password to gain admin access my Orbi router -- I had to reset the password with the serial number of my Orbi Router after several failed attempts.