NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Best orbi settings/Advanced settings as of 2019?
I believe uPnP would be already disabled in AP mode. Thats only available in router mode.
ohh ok
ill give it 24 hours and see what happens
Hopefully it stablizes. :smileywink:
yes and how long wil that take
Give it some time. Day or two? Keep us posted on what you see.
ok its been a full day internet is good it's just packet loss thats causing these problems you know how to fix packet loss on orbi
What is the Mfr and model# of the ISP modem the NG router is connected too?
Download pingplotter.com on to a PC. Wire connect the PC directly to the ISP modem first and test with out the Orbi connected. Test from PC to modem them from modem to the pingplotter.com site. Then connect the Orbi to the modem and the PC to the Orbi. Ping the Orbi first, then the modem thru the Orbi then pingplotter site thru both Orbi and modem. I would recommend doing this while ALL other devices are turned OFF and not connected. Just the wired PC alone.
Checking for any packlet loss and errors along the way at each stage as you test. Review the pingplotter site for information on what to look for.
Singal from ISP can be an issue. ISP Cabling up to the modem can be an issue. Modem can be an issue.
ok so i did all of that and it was normal but i do have a router downstairs a netgear one but upstairs i have a modem connected to my router and the router connected to the satiltte