NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Connection Type (Wired vs Wireless) Not Reporting Properly
Hi Folks, I recently set up a RBK50 with an additional satellite. So Obri products on the network are: RBR50, RBS50, and RBS20. The problem I am having is the attached devices page (also the Orbi...
Please follow the following procedure to print few parameters that will show what information the Router has about your Satellites:
- From browser go to the router's debug page (http://192.168.1.1/debug.htm). Use your router's IP address or http://orbilogin.com/debug.htm
- Enter admin as user name and your router’s management password
- Tick "Enable Telnet" option
- Use Telnet from a computer attached to Orbi to connect to your Router telnet 192.168.1.1 and enter admin and the same password that you used to login to Orbi
- Enter the following commands:
nvram show | grep sate_default_name[0-9]
config get satellite_online_num
nvram show | grep satellite[1-9]
nvram show | grep sate[1-3]
nvram show | grep 'orbi_dev_name[1-3]