NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

whittle's avatar
whittle
Guide
Jun 18, 2018

Guest network in AP Mode?

I'm thinking about putting a router in front of my RBK50 and running the Orbi system in Access Point mode.  Do you lose access to the Guest Network feature in AP mode?   Thanks much.   whittl...
Features
Mozez's avatar
Mozez
Guide
Jun 18, 2018

Hi Whittle,

 

My ORBI router is currently on 2.1.4.10. 

 

Regards,

Moses

whittle's avatar
whittle
Guide
Jun 18, 2018

Moses,

 

Another question if I am not overstaying my welcome...

 

Do you know if the LAN ports on your Orbi router and Orbi satelites are active in your configuration?  Are they basically acting as switch ports for your internal network?

 

-whittle

  • Mozez's avatar
    Mozez
    Guide
    Jun 18, 2018

    Hi Whittle,

     

    I can confirm that the LAN ports on the router are active and working in AP mode. I have a windows PC connected to one port and another switch connected to a second port, so yes they are all still active in AP mode. I can't confirm the ORBI satellites since I have two RBW30s which doesn't come with any LAN ports. However, I don't see why they would not work either. It would basically be the same as in Router mode.

     

    I also have both the ORBI router and satellites assigned static IP addresses from my FIOS router (via MAC address) since the ORBI doesn't allow you to set them directly. Makes connecting to each of them much easier. You don't have to look up their information each time.

     

    Regards,

    Moses

    • whittle's avatar
      whittle
      Guide
      Jun 18, 2018

      Thanks Moses and FURRYe38!

      • JoeM845's avatar
        JoeM845
        Luminary
        Jun 18, 2018

        I am running an RBK50 in AP mode under fw 2.1.4.10 with a guest network that is set to not let guests see each other. When I wirelessly connect a PC via the guest network I can manage the Netgear GS108 and GS116 switches that should be invisible to a guest. An IP scanner software also sees the deivces on the regular network. I cannot browse into the RBR50 or the RBS50. I cannot browse into other regular network devices that have a web GUI. I have not tried other penetrations of the guest network.

         

        FW 2.1.4.16 is purported to have addressed this problem. It was made available 6/4, but is not yet the public release/update. I have not tried it. See the discussion "Orbi firmware update v2.1.4.16 availability".

         

        I was waiting until the new fw hit the regular rlease, but I just noticed a flag on my Orbi home page that says "A new firmware upgrade is available. Click here to get it". This is new. This is big if it also means "Don't click here to not get it"