×

Introducing the Orbi 970 Series Mesh System with WiFi 7(BE) technology. For more information visit the NETGEAR Press Room.

Orbi WiFi 7 RBE973
Reply

Orbi Model RBK50 When syncing the satellite does the light pulse on stay on steady when synced?

AnnieBelle
Follower

Orbi Model RBK50 When syncing the satellite does the light pulse on stay on steady when synced?

I am having a hard time connecting my robot vac to the internet.  and I am wondering if the satellite orbi is synced with the main router.  I get a blue color but it is pulsing and not staying on steady.  What am I doing wrong.  Our tvs are connected ok.

Message 1 of 3
Mikey94025
Hero

Re: Orbi Model RBK50 When syncing the satellite does the light pulse on stay on steady when synced


@AnnieBelle wrote:

I am having a hard time connecting my robot vac to the internet.  and I am wondering if the satellite orbi is synced with the main router.  I get a blue color but it is pulsing and not staying on steady.  What am I doing wrong.  Our tvs are connected ok.


Here are what the colors mean: https://kb.netgear.com/31030/What-do-the-LEDs-on-my-Orbi-router-and-satellite-mean .  It says:

 

Pulsing blue and magenta. The Internet connection is blocked because the traffic meter is configured to block Internet traffic when it reaches the limit you configured.

 

Do you have any traffic limits set on your Orbi?

Message 2 of 3
FURRYe38
Guru

Re: Orbi Model RBK50 When syncing the satellite does the light pulse on stay on steady when synced

What Firmware version is currently loaded?
What is the Mfr and model# of the Internet Service Providers modem/ONT the NG router is connected too?

What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-router

 

What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
https://kb.netgear.com/19668/Link-Rate-and-Transfer-Speed

Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings

Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Set Short preamble instead of Long preamble modes. Save settings and reboot the router and satellite(s).


@AnnieBelle wrote:

I am having a hard time connecting my robot vac to the internet.  and I am wondering if the satellite orbi is synced with the main router.  I get a blue color but it is pulsing and not staying on steady.  What am I doing wrong.  Our tvs are connected ok.


 

Message 3 of 3
Top Contributors
Discussion stats
  • 2 replies
  • 287 views
  • 0 kudos
  • 3 in conversation
Announcements

Orbi WiFi 7