NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi RBR20 constantly offline
I bought an Orbi RBR20 system a couple of weeks ago. First it worked well but then I updated the firmware. Since then the satellites have disconnected around 2-3 times a week (distance less than 10 m...
Hi P95357 ,
Please follow the following steps:
- From browser go to the router's debug page (http://192.168.1.1/debug.htm). Use your router's IP address or http://orbilogin.com/debug.htm
- Enter admin as user name and your router’s management password
- Tick "Enable Telnet" option
- Use Telnet from a computer attached to Orbi to connect to your Router telnet 192.168.1.1 and enter admin and the same password as above
- Enter the following commands:
- root@RBR50:/# config get wan_lease —> Should give you 86400 which means 24 hours
- root@RBR50:/# config set wan_lease=3600 —> 3600 means 1 hour
- root@RBR50:/# config commit
Thank you, ekhalil
I tried it but I can't do step 4:
- Use Telnet from a computer attached to Orbi to connect to your Router telnet 192.168.1.1 and enter admin and the same password as above"
After completing all previous actions, once connected via Ethernet to the Orbi with a laptop computer, I type 192.168.1.1 and it gives me a "this page can't be reached" screen.
I don't want to hijack the post, so I created a new one with more information about my setup and what I have tried.
Thanks.