NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Orbi RBR50 - Solid Magenta - Not connecting to Modem
Hi All I have a Zyxel modem setup in VDSL bridge mode, with an RBR30 as my router. I followed the instructions here: https://kitz.co.uk/routers/zyxel_VMG8324-B10A_bridge.htm to set this up and i...
So it worked for 2 years.
yay for you. but it still wasn't setup properly and is still a double nat.
And worse, its a double nat with both routers in the same subnet.
Its lucky it worked at all.
If you want to leave it as is, go ahead. But it isn't working.
So maybe a change to set it up properly is needed.
Why is it double NAT when the modem has all that functionality disabled? It is in bridge mode, which, by definition means that NAT is disabled on it!
The Zyxel (modem) is setup so that "LAN1" is connected to the WAN port on the ORBI. "LAN 4" is then connected to the LAN side of the ORBI. On the Zyxel, LAN1 is then segregated from the rest of the ports, so the modem basically has a LAN side (LAN 2 - 4) and a WAN side (LAN 1).
The reason for having the modem (LAN side) on the same subnet is to allow me to access it via the network to check on line stats etc.
This is a tried and tested setup, used by many others with no issues, not just me. Yay.
Or... the Orbi is trying to force itself back to 192.168.1.1 (default I believe) and creating the conflict with the modem which is on that IP - then jumping to some random other value.
When I have time, I think I will try a full reset of the ORBI and set it all up again. If that doesn't work, then I may have to resort to re-configuring the modem (back to being the router) and the ORBI as the AP. Will need to check the Zyxel supports everything I was using on the Orbi (VPN, dynamic DNS updates etc.)