Problem is with Orbi Satellite routing to ETH attached NAS device on the Orbi Router.
General config;
Beamforming, MU-MIMO & Fast Roaming enabled. Latest firmware on Router & Sats.
Synology NAS, wired connected to Orbi Router. IP: 10.0.0.10
Attempted connection via (any) device on the Satellite RBS50, such as my Macbook;
angr:~ angr$ ping 10.0.0.10
PING 10.0.0.10 (10.0.0.10): 56 data bytes
Request timeout for icmp_seq 0
--- 10.0.0.10 ping statistics ---
4 packets transmitted, 0 packets received, 100.0% packet loss
However, if the same device is connected wirelessly via the Router, it works;
angr:~ angr$ ping 10.0.0.10
PING 10.0.0.10 (10.0.0.10): 56 data bytes
64 bytes from 10.0.0.10: icmp_seq=0 ttl=64 time=1.965 ms
--- 10.0.0.10 ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss------------
I've tried changing ETH ports on the Router etc. to no avail. Any ideas?
