NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

bobselff's avatar
bobselff
Aspirant
Dec 31, 2018

Orbi not giving full bandwidth -Orbi AC3000

Need some help please as I'm at a loss. I have internet with 350 megs. When I test the internet speed using the orbi app it shows 320-350 which is perfect. When I connect my Ipad and run a test in th...
Troubleshooting
bobselff's avatar
bobselff
Aspirant
Dec 31, 2018

Router Firmware Version V2.2.1.210

Modem: Netgear CM600

Operating as: Router

 

Home Size: 1900 sqf

Distance about 25-30 feet

Channels: Auto

Neighbors: 5

WPA - WPA2

Orbi App - Phone and Ipad

 

You were correct on the ipad, only goes to 100. I tried my phone downstairs and its at 300+.(Playstation Downstairs)

My main concern was my sons playstation. I was using the ipad to test. It seems wired or wireless his speeds fluctuate from 30-135.Connections to the satelltes show good. 

bobselff's avatar
bobselff
Aspirant
Dec 31, 2018

 

 
Region Selection
Region:
Advanced Wireless Settings (2.4GHz b/g/n)
Enable SSID Broadcast
Enable Wireless Router Radio
(This action is currently disabled until the wireless On/Off button is pressed)
Enable 20/40 MHz Coexistence
Enable WMM (Wi-Fi multimedia) settings
Fragmentation Length (256-2346)
CTS/RTS Threshold (1-2347)
Preamble Mode
Transmit Power Control
Turn off wireless signal by schedule
The wireless signal is scheduled to turn off during the following time period:
Period Start End Recurrence Pattern
         
Advanced Wireless Settings (5GHz 802.11a/n/ac)
Enable SSID Broadcast
Enable Wireless Router Radio
(This action is currently disabled until the wireless On/Off button is pressed)
Enable WMM (Wi-Fi multimedia) settings
Fragmentation Length (256-2346)
CTS/RTS Threshold (1-2347)
Preamble Mode
Transmit Power Control
Turn off wireless signal by schedule
The wireless signal is scheduled to turn off during the following time period:
Period Start End Recurrence Pattern
         
WPS Settings
Router's PIN:  
Enable Router's PIN
To prevent PIN compromise, auto disable the PIN after failed PIN connections, until router reboots.
In auto disabled mode, router's WPS LED will keep blinking slowly
Keep Existing Wireless Settings
 
Enable HT160
Wireless Card Access List
Backhaul Topology
Enable Daisy-Chain Topology
 
Backhaul Password
Orbi can generate a new hidden password to improve security for its backhaul connection.
WARNING: Generating a new password might cause the Orbi satellite to lose connection from the Orbi router. To reconnect, use the Sync button.     
Enable Implicit BEAMFORMING - Boosts WiFi speed, reliability, & range for all mobile devices
Enable MU-MIMO

Enable Fast Roaming

 

All boxes checked except Enable Fast Roaming