×

Introducing the Orbi 970 Series Mesh System with WiFi 7(BE) technology. For more information visit the NETGEAR Press Room.

Orbi WiFi 7 RBE973
Reply

Re: Plus de connexion iphone et Ipad avec RBR50 en mode pont

EHOEHO91
Aspirant

Plus de connexion iphone et Ipad avec RBR50 en mode pont

Bonjour,

j'utilise un RBR50 avec 2 satellites en extension de mon routeur fourni par l' ISP pour la fibre. Depuis une semaine, seuls les PC accedent a Internet via le WIFI, les iphone et ipad sont connectés au wifi mais rien ne se passe, ils téléchargent la 1ere page puis plus rien... quelqu'un a une idée, j'ai passé borne RBR en adresse fixe pour voir si cela changeait quelque chose, mais non. ci joint la version utilisée :

Version Matérielle    RBR50   Version du firmware    V2.5.0.38   Version de la langue de l'interface    V1.0.0.360   Mode de fonctionnement    PA

Model: RBR50|Orbi AC3000 Tri-band WiFi Router
Message 1 of 4
FURRYe38
Guru

Re: Plus de connexion iphone et Ipad avec RBR50 en mode pont

en anglais s'il vous plaît

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CAX80 Modem Mode  | Wifi Router RBKE963 and RBE973 | Switches NG GS105/8, GS308v3, GS110MX and XS505M | Additional NG HW: C7800/CAX30/CAX80/CM1100/CM1200/CM2000, Orbi: CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: MK63, MK93S, R7000, R7800, R7960P, R8000, RAXE500, RAX120v2, RAX50v2, XR450/500/700/1000,

Message 2 of 4
EHOEHO91
Aspirant

Re: Plus de connexion iphone et Ipad avec RBR50 en mode pont

Hello,

I am using a RBR50 with 2 satellites in extension of my router provided by the ISP for the fiber. For a week, only PCs access the 
Internet via WIFI, iphone and ipad are connected to the wifi but nothing happens, they download the first page then nothing ...
someone has an idea ? I spent RBR terminal in fixed address to see if it changed anything, but no. here is the version used: Hardware Version RBR50 Firmware Version V2.5.0.38 Interface Language Version V1.0.0.360 PA Operating Mode
Model: RBR50|Orbi AC3000 Tri-band WiFi Router
Message 3 of 4
FURRYe38
Guru

Re: Plus de connexion iphone et Ipad avec RBR50 en mode pont

What is the Mfr and model# of the ISP modem the NG router is connected too? Built in router here by chance? If so,

This would be a double NAT condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly. Then use the Orbi router in router mode. 
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop

 

 

 

 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CAX80 Modem Mode  | Wifi Router RBKE963 and RBE973 | Switches NG GS105/8, GS308v3, GS110MX and XS505M | Additional NG HW: C7800/CAX30/CAX80/CM1100/CM1200/CM2000, Orbi: CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: MK63, MK93S, R7000, R7800, R7960P, R8000, RAXE500, RAX120v2, RAX50v2, XR450/500/700/1000,

Message 4 of 4
Top Contributors
Discussion stats
  • 3 replies
  • 549 views
  • 0 kudos
  • 2 in conversation
Announcements

Orbi WiFi 7