NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RBK50 IPv6 Stops Working
About every 24 hours IPv6 stops functioning on my system. Verified via http://ipv6-test.com. I have to login and click apply in the IPv6 setting and it starts working again for about 24 hours. I h...
With no changes to the Orbi setup from last night, IPv6 is now working this morning. This is making my brain hurt...
Every few days, my iPV6 stops working. I was doing a reset from the cable modem (in bridge mode) to the Orbi router and then satellites, it would work again each time after this.
I then tried resetting only the cable modem. It had no effect.
I tried turning off and on the IPv6 in the Orbi router and it worked again. This certainly appears to be another failing in the Orbi Firmware. Annoyance to say the least.
Yes. Very annoying. My Ipv6 is not working this morning. It must be a FW bug.
I will report this to engineering and see what we can do to replicate the issues.
DarrenM
I can confirm on Router Firmware Version V2.1.4.16 I can't get IPv6 to work.
It gets the IPv6 from the ISP, but it does not forward the details to the client.
On the IP Address Assignment I have tested with "Use DHCP Server" and "Auto Config". None of those options are working, the clients do not get IPv6 addresses!
Help!
ipv6 settings
I can confirm on .16 my ipv6 worked fine with Autodetect setting via Spectrum internet provider.
How do you ask? Because I had to turn it OFF because freaking Fingbox and Disney Circle can't pause internet access on devices that can use IPV6. You basically have to revert to IPV4 if you want control over modern devices. Opendns's newer IPV6 settings / servers did work fine if anybody is wondering.
