After a lot of searching I bought an Orbi RBR50 with 2 Satelights. Was easy to set up and internet speed was great.
After a day or two it started disconnecting from the internet at least 3 or 4 times a day.... This is really really annoying and doesn't match a high end mesh like Orbi and the price it costs.
I'm minutes away from returning it.
Data -
Every time there is no internet at the house, disconnecting the cable to the wall (internal from ISP is directly from the wall, no router or log-in needed) and connecting back solves the problem
Reading around the community there was an advise to change the lease timer, i changed it to 750 through telnet. Nothing changed.
I contacted Orbi support and they made me downgrade Firmware to 2.3.5.20. Nothing changed. I still get disconnects at least 3 times a day
At this point I'm out of solution. This is really disapointing for a procut like this and I'd appreciate help
About the internet, I'm connected through Frontier in the US. Sorry for not knowing the actual profession terms. What I meant is that the connection doesn't require any user/PW. You can plug-in your cable directly to the wall and you have internet and this is where Orbi is connected and how it was configured.
I just another disconnect and looked at the logs if that helps.
[UPnP set event: add_nat_rule] from source 192.168.1.10, Friday, April 17, 2020 22:42:55 [UPnP set event: del_nat_rule] from source 192.168.1.10, Friday, April 17, 2020 22:42:30
--------- at this point there was no internet and I went and disconnected the cable and connected it back [UPnP set event: add_nat_rule] from source 192.168.1.10, Friday, April 17, 2020 22:41:26 [admin login] from source 192.168.1.10, Friday, April 17, 2020 22:41:13 [UPnP set event: del_nat_rule] from source 192.168.1.10, Friday, April 17, 2020 22:41:08 [UPnP set event: add_nat_rule] from source 192.168.1.10, Friday, April 17, 2020 22:40:05
The fact that even NG support is advising users to revert to 2.3.5.30 should be proof alone for the disbelievers who hold on to their dozens of useless questions
thank you about the reply on UPnP but I wasn't clear if you think that the fact that it is enabled is the source of the disconnects or not. I do see many past posts debating whether to turn it off or not but we do have XBOX and I need it to continue working. Would stuggle with XBOX only if UPnP is the source which I didn't see a definite post saying it is from NG
This is a great product when it works. If it continue disconnecting I'm going to return to the store and never buy NG again. It is really quie embarassing that I need to deal with such a thing on my own. I expect such a high end product to be ressilient to whatever is cauing this
After a lot of searching I bought an Orbi RBR50 with 2 Satelights. Was easy to set up and internet speed was great.
After a day or two it started disconnecting from the internet at least 3 or 4 times a day.... This is really really annoying and doesn't match a high end mesh like Orbi and the price it costs.
I'm minutes away from returning it.
Data -
Every time there is no internet at the house, disconnecting the cable to the wall (internal from ISP is directly from the wall, no router or log-in needed) and connecting back solves the problem
Reading around the community there was an advise to change the lease timer, i changed it to 750 through telnet. Nothing changed.
I contacted Orbi support and they made me downgrade Firmware to 2.3.5.20. Nothing changed. I still get disconnects at least 3 times a day
At this point I'm out of solution. This is really disapointing for a procut like this and I'd appreciate help
The fact that even NG support is advising users to revert to 2.3.5.30 should be proof alone for the disbelievers who hold on to their dozens of useless questions
