RBS50Y Keeps broadcasting NETGEAR-GUEST

[computersteve]

I HAVE NO CLUE HOW TO FIX THIS.. I have tried disabling guest / reenabling / repairing the satelites / uncheck broadcast SSID. The RBS50Y keeps broadcasting a NETGEAR-GUEST ssid that you cant actually even use cause you get no internet connectivity. I notice that it keeps this SSID even when I change the guestnetwork name. It broadcast this with the network that I named my Guest Network. Any fix ? is there a way to disable this through telnet ? 

[computersteve]

Its broadcasting a 2.4GhZ NETGEAR GUEST & a 5ghz. So in my wifi scanner I see two of them. 

[FURRYe38]

What Firmware version is currently loaded on the RBR, RBS and RBSY?

[computersteve]

All the latest firmwares - V2.7.2.104 on my Orbi & Sats & V2.6.2.104 on my RBS50Y

[computersteve]

I'm trying to downgrad the firmware to RBS50Y-V2.3.5.32. Apparently other people are having this issue & no one at Netgear is fixing it =(

[computersteve]

It didn't work -- I tried telnet.. I will see if that works - 

root@RBS50Y:/# config get wlg1_ssid
NETGEAR-Guest
root@RBS50Y:/# config get wla_ssid
Antonacci418
root@RBS50Y:/# config get wla1_ssid
NETGEAR-Guest
root@RBS50Y:/#
root@RBS50Y:/# config get wla2_ssid
Antonacci-Guest
root@RBS50Y:/#
root@RBS50Y:/# config set endis_wla1_ssid=0
root@RBS50Y:/#
root@RBS50Y:/# config set endis_wlg1_ssid=0

[computersteve]

So it seems like Netgear is pushing this upgrade automatically. Meaning when I downgraded to 2.3.5.32 it automatically updated back to the buggy firmware. It seems the only way to fix this till Netgear fixes it is through Telnet using commands - 

root@RBS50Y:/# config set endis_wla1_ssid=0
root@RBS50Y:/# config set endis_wlg1_ssid=0

[FURRYe38]

Please make contact with NG support and let them know about this. NG will need to review this for your unit. 

Good luck.