NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
V2.5.1.16 connectivity issues
Since updating to V2.5.1.16 on RBR50 and satellite, I am having brief moments of network disruption experienced by all devices on the network. My husband and I will be on our laptops while music is s...
daddydoitall wrote:Rolling back the firmware from 2.5.1.16 to 2.5.1.8 on the router and two satellites has stopped the wireless internet drops. I wonder what it was with the new frimware caused the problem. Thanks for everyone's help.
Good question as my RBK53 system is rock solid on 2.5.1.16, auto updated on install from 2.5.1.8 when purchased.
When I have time I will do that. Is a there anything special to do to make sure my 40 devices reconnect properly after resetting from scratch?
30 feet or more is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-router
Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?Try enabling Beamforming and MIMO(MIMO may or may not be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings
Try disabling the following and see:
Armor, Circle, Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Save settings and reboot the router and satellite(s).One User Experience/Configuration:
https://community.netgear.com/t5/Orbi/Most-Stable-Orbi-Configuration/m-p/1941087/highlight/true#M97026
daddydoitall wrote:
When I have time I will do that. Is a there anything special to do to make sure my 40 devices reconnect properly after resetting from scratch?I would Backup your settings. I would name your SSID the same as before.
After you are up and running, devices connected and fully tested, you could restore your settings to save time renaming, etc.. But if something in your settings was causing the issue it could bring it right back.
