NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
VPN
Cannot get VPN setup. Also remote management reports that my device is offline when i know it is not. Getting Server certificate not setup or something. Support already over with 3 months for a 40...
Ok...
I recommend before you start any other troubleshooting, you update to the current (.32) firmware which has improved backhaul reliability.
The trick on the upgrade is that your RBR50 has to be updated to an intermediate firmware version (2.2.1.212) before going final with the .32 version.
Here is the link for the intermediate firmware:
https://www.dropbox.com/s/34qdnx73uikusf7/RBR50-V2.2.1.212.zip?dl=0
The final version (2.3.0.32) is found here:
https://kb.netgear.com/000060603/RBR50-RBS50-Firmware-Version-2-3-0-32
You will flash both the satellites as well as the router.
Recommend you be connected to your router via ethernet (rather than wireless) to do the flashing.
Also, flash the router to the intermediate version, then after reboot, flash each satellite to the final version and then flash the RBR50 to the final version (in that order).
Okay so successfully updated satelites and router to latest firmware. Still getting the same errors as i did before.
Thu Mar 07 11:39:07 2019 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info.
Thu Mar 07 11:39:18 2019 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this