Orbi AX6000

[MatthewGC]

Hi All,

Quick question: has anyone successfully connected the Orbi AX6000 to a BT Smart hub 2?  

Mine refuses to connect to the internet

Thanks

[FURRYe38]

Your ISP Modem already has a built in router and wifi. This would be a double NAT (two router) condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAT
https://kb.netgear.com/30187/How-to-fix-issues-with-Double-NAT
Couple of options,
1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop

Be sure to check cabling in between as well. CAT6 is recommended.

[MatthewGC]

Sounds technical but I'll give it a go!  Thanks for taking the time to reply.

Matthew

[FURRYe38]

Good Luck.