× We are working to resolve an issue that is preventing some customers from accessing the Orbi app or web interface for the Orbi RBK85x and RBK75x. We are investigating this as the highest priority and will provide updates at Status.NETGEAR.com
Reply

RBK852 Firmware Update V3.2.11.2_1.2.13

dglsmcd_USMC
Luminary

RBK852 Firmware Update V3.2.11.2_1.2.13

Not showing up on the NG server yet. Had to manually install-RBS850 FIRST-then RBR850 followed by a hard reset and fresh install-do not use previous config files.

 

Here are the links:

RBR850

http://www.downloads.netgear.com/files/GDC/RBK852/RBR850-V3.2.11.2_1.2.13.zip 

 

RBS850

http://www.downloads.netgear.com/files/GDC/RBK852/RBS850-V3.2.11.2_1.2.13.zip 

Message 1 of 15
FURRYe38
Guru

Re: RBK852 Firmware Update V3.2.11.2_1.2.13

Wondering if this includes an AP mode fix...Hmm.

Thanks for posting.

Bug Fixes:

  • Includes bug fixes for three Orbi Satellites that are connected to the Orbi network

https://kb.netgear.com/000061862/RBR850-RBS850-Firmware-Version-3-2-11-2

 

Off to testing we go. Smiley Wink

 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM2000 Modem | Wifi Router RAXE50 and R8500(v.158) Router Mode and RBK752(v.2) AP mode | Switches NG GS105/8 | 

Additional NG HW: C7800/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700, GS308v3

Message 2 of 15
KMDonlon
Luminary

Re: RBK852 Firmware Update V3.2.11.2_1.2.13

Is this beta or official firmware?
Message 3 of 15
FURRYe38
Guru

Re: RBK852 Firmware Update V3.2.11.2_1.2.13

Anything posted on NGs support download site is not beta. 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM2000 Modem | Wifi Router RAXE50 and R8500(v.158) Router Mode and RBK752(v.2) AP mode | Switches NG GS105/8 | 

Additional NG HW: C7800/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700, GS308v3

Message 4 of 15
FURRYe38
Guru

Re: RBK852 Firmware Update V3.2.11.2_1.2.13

Well sad to say that v11.2 doesn't fix RBS status in the RBRs UI when in AP Mode with a LAN switch in between the RBR and RBS. Still broke here. Smiley Sad Take the LAN switch out and RBS status appears correctly in the RBRs web page and Orbi app with RBS directly connected ethernet to the back of the RBR. Smiley Wink

 

Happy to report that in router mode on the RBR with a LAN switch in the middle and the RBS ethernet connected to the switch status reports correctly on the RBRs web page and in the Orbi app. Smiley Happy

 

@Blanca_O 

@Christian_R 

@ErnestTheGreat 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM2000 Modem | Wifi Router RAXE50 and R8500(v.158) Router Mode and RBK752(v.2) AP mode | Switches NG GS105/8 | 

Additional NG HW: C7800/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700, GS308v3

Message 5 of 15
FURRYe38
Guru

Re: RBK852 Firmware Update V3.2.11.2_1.2.13

Also default values for CTS and RTS are at 64 in this version again. So for those of you seeing problems after you update, besure to set 2346 or 7. 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM2000 Modem | Wifi Router RAXE50 and R8500(v.158) Router Mode and RBK752(v.2) AP mode | Switches NG GS105/8 | 

Additional NG HW: C7800/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700, GS308v3

Message 6 of 15
KMDonlon
Luminary

Re: RBK852 Firmware Update V3.2.11.2_1.2.13

Just upgraded and my CTS/RTS values remained at 2347 as I previously had them set up. Weird yours changed back.
Message 7 of 15
FURRYe38
Guru

Re: RBK852 Firmware Update V3.2.11.2_1.2.13

I should have mentioned that if you factory reset the values will be changed to 64. I factory reset my RBR. Smiley Wink

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM2000 Modem | Wifi Router RAXE50 and R8500(v.158) Router Mode and RBK752(v.2) AP mode | Switches NG GS105/8 | 

Additional NG HW: C7800/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700, GS308v3

Message 8 of 15
McLong
Apprentice

Re: RBK852 Firmware Update V3.2.11.2_1.2.13

No new firmware found when checking within the App or web interface. Does anyone know why this update hasn't pushed OTA to the RBR852?

Current firmware: v3.2.10.11_1.2.12
Message 9 of 15
whoDean
Guide

Re: RBK852 Firmware Update V3.2.11.2_1.2.13

I was able to manually update the router fine, but unable to update my two satellites.  Prompts for the user name/password but will not accept the correct user/password combination from the router.  Tried resetting both satellites and reconnecting to the router, no luck.  So now I have mismatched firmware, with the router on the updated version and the satellites on the older version.

Message 10 of 15
whoDean
Guide

Re: RBK852 Firmware Update V3.2.11.2_1.2.13

check that, it was some sort of stupid browser issue.  Updating satellites now

Message 11 of 15
DoctorA
Luminary

Re: RBK852 Firmware Update V3.2.11.2_1.2.13

What were the problems to begin with using 3 Orbi Satellites that are connected to the Orbi router?

I am successfully using 3 wired satellites for many months now, 1 RBS 850 and 2  RBS50.

Router is in Router mode.

ATT GigaPower Fiber-->ONT-->BGW-210 RGW in IP Passthrough mode-->RBR850
Wired Topology RBS50---RBR 850-->RBS850--> RBS50 Ethernet backhaul
Firmware Version V3.2.16.6_1.4.4 for RBS 50 V3.2.16.6_1.4.4Router mode
Message 12 of 15
FarmerBob1
Luminary

Re: RBK852 Firmware Update V3.2.11.2_1.2.13


@whoDean wrote:

.....Prompts for the user name/password but will not accept the correct user/password combination from the router.....


I noticed last week that I couldn't get into my second RBS so I just blew it off. Today when I updated, I hit the same thing. Out of habit, I've left my Username the default, "admin". So I wiped my password and tried the default, "password" and it worked. I got right in. A couple of weeks ago when I did a "Pin-Hole Rest" after reverting the FW back to 10.11 from 10.13T, I rebooted the RBR and still had problems with the RBS2 joining the network and several other problems. Usually they may take a couple of minutes to jump on, but... Then when it did, it wouldn't take any other user assigned name through the Orbi App than "Satillite-2". It seems to be slowly coming around after doing the unthinkable, which I've been doing a lot lately, and in this case, used the backup settings file from the previous 10.11 install. Once reinstalled things worked better than when inputting the settings from scratch. But it was the default NG logins that got me in.

Sir ORBI of the clan Mountain Lion . . . Defender, Protector and Provider of WiFi to the peasants . . .

My Setup ISP Lumen Fiber | Speed  940/940 from a Calix 716GE-I R2 ONT | WiFi Router RAXE500 v.1.0.9.78 Main Unit | Orbi RBK853 (FW, we'll see . . .) | Wireless Backhaulthen to all corners of the kingdom . . . with tons of toys stashed all over . . . that m'Laird thinks he has domain over.. . .
"It's not over until the Dragons are done strafing the lands and there's no spilled beers."

Message 13 of 15
FURRYe38
Guru

Re: RBK852 Firmware Update V3.2.11.2_1.2.13

This seems to be a minor FW update vs Major. NG only seems to push major versions of FW so this version may not be pushed to the auto update servers. Which is ok. Manual updating works well. 


@McLong wrote:
No new firmware found when checking within the App or web interface. Does anyone know why this update hasn't pushed OTA to the RBR852?

Current firmware: v3.2.10.11_1.2.12

 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM2000 Modem | Wifi Router RAXE50 and R8500(v.158) Router Mode and RBK752(v.2) AP mode | Switches NG GS105/8 | 

Additional NG HW: C7800/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700, GS308v3

Message 14 of 15
FURRYe38
Guru

Re: RBK852 Firmware Update V3.2.11.2_1.2.13

Try admin and password for the log in.

 

Also besure to clear all browser caches before entering the web pages of the RBS and RBR. Seen odd problems with browsers and cached information. 

 

I updated mine yesterday and was able to log in to the RBSs web pages using the RBRs log in info. They are wirelessly connected. 

 

Always be sure to update RBS first then RBR lastly. 

 


@whoDean wrote:

I was able to manually update the router fine, but unable to update my two satellites.  Prompts for the user name/password but will not accept the correct user/password combination from the router.  Tried resetting both satellites and reconnecting to the router, no luck.  So now I have mismatched firmware, with the router on the updated version and the satellites on the older version.


 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM2000 Modem | Wifi Router RAXE50 and R8500(v.158) Router Mode and RBK752(v.2) AP mode | Switches NG GS105/8 | 

Additional NG HW: C7800/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700, GS308v3

Message 15 of 15
Top Contributors
Discussion stats
  • 14 replies
  • 1794 views
  • 6 kudos
  • 7 in conversation
Announcements

Orbi WiFi 6E