Reply

RBK852 satellite does not allow NAT Loopback

pickwit
Tutor

RBK852 satellite does not allow NAT Loopback

My RBK852 satellite does not allow me to gain  wifi access to my domain name of my camera DVR internally. However,  I can access this domain when connecting with wifi from the router side ie. the router supports NAT Loopback perfectly. All ports for this device are open and forwarded correctly and the DVR is a wired connection to the satellite.

 

Why does the RBK852 satellite not allow NAT loopback?

 

Message 1 of 6

Accepted Solutions
FURRYe38
Guru

Re: RBK852 satellite does not allow NAT Loopback

Thank you for letting us know. 

 

Enjoy. Smiley Wink


@pickwit wrote:

My problem has been sorted out by Duxbury and Netgear. They sent me a hot-fix firmware which resolved this issue and NAT loopback onthe satellite works flawlessy whether wired or not.

 

I'm sure an update will be rolled out shortly.

 

Thank you Duxbury and Netgear support.


 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CAX80 Modem Mode |  Wifi Router RBK953 (Router Mode) 2.5Gb Wired Backhaul | Switches NG GS105/8, GS308v3, GS110MX and XS505M | XR1000 (Router Mode) and RBK853 AP Mode  | 

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: MK63, R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700

View solution in original post

Message 5 of 6

All Replies
FURRYe38
Guru

Re: RBK852 satellite does not allow NAT Loopback

What FW version are you using? 

Something to ask NG support about:

https://www.netgear.com/support/#

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CAX80 Modem Mode |  Wifi Router RBK953 (Router Mode) 2.5Gb Wired Backhaul | Switches NG GS105/8, GS308v3, GS110MX and XS505M | XR1000 (Router Mode) and RBK853 AP Mode  | 

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: MK63, R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700

Message 2 of 6
pickwit
Tutor

Re: RBK852 satellite does not allow NAT Loopback


@FURRYe38 wrote:

What FW version are you using? 

Something to ask NG support about:

https://www.netgear.com/support/#

 

I'm using latest firmware: V3.2.16.6_1.4.4


 

Message 3 of 6
pickwit
Tutor

Re: RBK852 satellite does not allow NAT Loopback

My problem has been sorted out by Duxbury and Netgear. They sent me a hot-fix firmware which resolved this issue and NAT loopback onthe satellite works flawlessy whether wired or not.

 

I'm sure an update will be rolled out shortly.

 

Thank you Duxbury and Netgear support.

Message 4 of 6
FURRYe38
Guru

Re: RBK852 satellite does not allow NAT Loopback

Thank you for letting us know. 

 

Enjoy. Smiley Wink


@pickwit wrote:

My problem has been sorted out by Duxbury and Netgear. They sent me a hot-fix firmware which resolved this issue and NAT loopback onthe satellite works flawlessy whether wired or not.

 

I'm sure an update will be rolled out shortly.

 

Thank you Duxbury and Netgear support.


 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CAX80 Modem Mode |  Wifi Router RBK953 (Router Mode) 2.5Gb Wired Backhaul | Switches NG GS105/8, GS308v3, GS110MX and XS505M | XR1000 (Router Mode) and RBK853 AP Mode  | 

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: MK63, R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700

Message 5 of 6
FURRYe38
Guru

Re: RBK852 satellite does not allow NAT Loopback

Any progress on this? 


@pickwit wrote:

My RBK852 satellite does not allow me to gain  wifi access to my domain name of my camera DVR internally. However,  I can access this domain when connecting with wifi from the router side ie. the router supports NAT Loopback perfectly. All ports for this device are open and forwarded correctly and the DVR is a wired connection to the satellite.

 

Why does the RBK852 satellite not allow NAT loopback?

 


 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CAX80 Modem Mode |  Wifi Router RBK953 (Router Mode) 2.5Gb Wired Backhaul | Switches NG GS105/8, GS308v3, GS110MX and XS505M | XR1000 (Router Mode) and RBK853 AP Mode  | 

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: MK63, R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700

Message 6 of 6
Top Contributors
Discussion stats
  • 5 replies
  • 621 views
  • 0 kudos
  • 2 in conversation
Announcements

Orbi WiFi 6E