Reply

Re: Firmware 3.2.16.6 Web GUI bug

Mstrbig
Master

Re: Firmware 3.2.16.6 Web GUI bug


@dtay wrote:

@Mstrbig wrote:

@dtay wrote:

Same problem via the web GUI as well.  I make the changes and it doesn't retain it.  Firmware V3.2.16.22_1.4.9 on 850's.


The latest firmware 3.2.17.12 fixes this issue. Confirmed on both 750 and 850 systems.


3.2.17.12 firmware?  Is that publically (or beta) released?  I don't see it on the website and my RBK850's doesn't detect it.

 
Glad to hear that 3.2.17.12 fixes it; is there a changelog of what's fixed in that release?

Official:

Download Link:

RBR850 - https://www.downloads.netgear.com/files/GDC/RBK852/RBR850-V3.2.17.12_1.4.14.zip

RBS850 - https://www.downloads.netgear.com/files/GDC/RBK852/RBS850-V3.2.17.12_1.4.14.zip

 

Orbi RBK53 System/RBR50/RBS50/RBS50. + Orbi Voice RBS40V
RBK753 system/RBR750/RBS750/RBS750 + RBK853 System/RBR850/RBS850/RBS850
SXK80 — Orbi Pro AX6000 WiFi 6 Tri-Band WiFi System
There's always a logical answer, if you have all the facts!
Message 26 of 29
AwesomeQA
Apprentice

Re: Firmware 3.2.16.6 Web GUI bug

Try RBR850 with RBS50 then you’ll see it is not fixed
RBR 50 Firmware Version 2.7.2.104
Message 27 of 29
FURRYe38
Guru

Re: Firmware 3.2.16.6 Web GUI bug

I don't use RBS50 with my Orbi AX system. I already have two RBS850s wired and online. I have enough wifi signal coverage. 


@AwesomeQA wrote:
Did you try connecting your RBS50 to RBR850 and change devices names.. etc.

 

My Setup (Cable 1Gbps/50Mbps)>CAX80 v2.1.2.1(LAG Disabled)>RBK853 v4.6.3.16
Additional NG HW: C7800/CM1100/CM1200CM2000, Orbi CBK40, CBR750, RBK50(v22), SXR30(v110), R7000(v34), R7800(v84), R7960P(v82), EX7500/EX7700, XR450(v120) and WNHDE111
Message 28 of 29
FURRYe38
Guru

Re: Firmware 3.2.16.6 Web GUI bug

I posted this also when v12 first came out:

https://community.netgear.com/t5/Orbi-AX/New-RBR850-RBS850-Series-Firmware-Version-v3-2-17-12-Releas...

 

Including release notes. 


@dtay wrote:

 

3.2.17.12 firmware?  Is that publically (or beta) released?  I don't see it on the website and my RBK850's doesn't detect it.
 
Glad to hear that 3.2.17.12 fixes it; is there a changelog of what's fixed in that release?

 

My Setup (Cable 1Gbps/50Mbps)>CAX80 v2.1.2.1(LAG Disabled)>RBK853 v4.6.3.16
Additional NG HW: C7800/CM1100/CM1200CM2000, Orbi CBK40, CBR750, RBK50(v22), SXR30(v110), R7000(v34), R7800(v84), R7960P(v82), EX7500/EX7700, XR450(v120) and WNHDE111
Message 29 of 29
Top Contributors
Discussion stats
  • 28 replies
  • 1003 views
  • 1 kudo
  • 7 in conversation
Announcements