Orbi WiFi 7 RBE973
Reply

Re: ORBI CBR750 requires manually releasing/renewing the IP

sen4ik
Guide

ORBI CBR750 requires manually releasing/renewing the IP

I have Netgear Orbi CBR750 with RBS750 satellite.

I own this for two month now.

Four days ago, it started dropping internet every 1.5 hours.

Rebooting the router would bring the internet back.

I called Xfinity, the tech came by and he checked the line all the way to the router. He showed me all the reading he got, the gain, the frequencies test and it all looks green. So it is not the cable.

After some digging, I noticed that 1.5 hours corresponds to the Lease Expires time that is present on the Connection Status page.

So I tried hitting Release and than Renew buttons once the internet went down - and that would bring the internet back.

As of right now, I am going to the Connection Status page and doing the release/renew every 1.5 hours.

I am not sure what happened and why it started doing it. It was fine for two months. I didn't update the firmware.

I tried setting up the static IP - it didn't help. It still dies after 1.5 hours.

Any help would be appreciated.

 

Logs:

[DHCP IP: (192.168.77.3)] to MAC address AC:3C:8E:00:7A:E7, Friday, Oct 22,2021 13:00:53
[DHCP IP: (192.168.77.14)] to MAC address 3E:C8:09:FA:E3:B8, Friday, Oct 22,2021 12:42:23
[DHCP IP: (192.168.77.9)] to MAC address CE:25:AD:5D:D5:9D, Friday, Oct 22,2021 12:40:53
[DHCP IP: (192.168.77.2)] to MAC address AC:3C:8E:00:76:95, Friday, Oct 22,2021 12:18:41
[DHCP IP: (192.168.77.17)] to MAC address 6C:CD:D6:E6:EB:8A, Friday, Oct 22,2021 12:15:38
[Internet connected] IP address: 98.41.205.35, Friday, Oct 22,2021 11:59:44
[Internet disconnected] Friday, Oct 22,2021 11:59:42
[DHCP IP: (192.168.77.14)] to MAC address 3E:C8:09:FA:E3:B8, Friday, Oct 22,2021 11:59:28
[Internet disconnected] Friday, Oct 22,2021 11:59:18
[DHCP IP: (192.168.77.5)] to MAC address F4:5C:89:B1:98:4B, Friday, Oct 22,2021 11:54:02
[DHCP IP: (192.168.77.17)] to MAC address 6C:CD:D6:E6:EB:8A, Friday, Oct 22,2021 11:48:38
[DHCP IP: (192.168.77.17)] to MAC address 6C:CD:D6:E6:EB:8A, Friday, Oct 22,2021 11:48:25
[DHCP IP: (192.168.77.17)] to MAC address 6C:CD:D6:E6:EB:8A, Friday, Oct 22,2021 11:44:01
[DHCP IP: (192.168.77.17)] to MAC address 6C:CD:D6:E6:EB:8A, Friday, Oct 22,2021 11:43:33
[DHCP IP: (192.168.77.5)] to MAC address F4:5C:89:B1:98:4B, Friday, Oct 22,2021 11:43:33
[DHCP IP: (192.168.77.17)] to MAC address 6C:CD:D6:E6:EB:8A, Friday, Oct 22,2021 11:43:24
[DHCP IP: (192.168.77.3)] to MAC address AC:3C:8E:00:7A:E7, Friday, Oct 22,2021 11:43:23
[DHCP IP: (192.168.77.2)] to MAC address AC:3C:8E:00:76:95, Friday, Oct 22,2021 11:37:42
[DHCP IP: (192.168.77.3)] to MAC address AC:3C:8E:00:7A:E7, Friday, Oct 22,2021 11:32:57
[DHCP IP: (192.168.77.5)] to MAC address F4:5C:89:B1:98:4B, Friday, Oct 22,2021 11:26:46
[DHCP IP: (192.168.77.2)] to MAC address AC:3C:8E:00:76:95, Friday, Oct 22,2021 11:15:44
[DHCP IP: (192.168.77.17)] to MAC address 6C:CD:D6:E6:EB:8A, Friday, Oct 22,2021 11:05:01
[DHCP IP: (192.168.77.17)] to MAC address 6C:CD:D6:E6:EB:8A, Friday, Oct 22,2021 11:04:36
[DHCP IP: (192.168.77.17)] to MAC address 6C:CD:D6:E6:EB:8A, Friday, Oct 22,2021 11:04:25
[DHCP IP: (192.168.77.17)] to MAC address 6C:CD:D6:E6:EB:8A, Friday, Oct 22,2021 11:03:31
[DHCP IP: (192.168.77.5)] to MAC address F4:5C:89:B1:98:4B, Friday, Oct 22,2021 11:03:30
[DHCP IP: (192.168.77.17)] to MAC address 6C:CD:D6:E6:EB:8A, Friday, Oct 22,2021 11:03:24

Firmware Version for the modem is V4.6.3.6_2.0.48. I have updated the satellite firmware today to V4.6.3.16.

Event log screenshot is attached.

Message 1 of 51
FURRYe38
Guru

Re: ORBI CBR750 requires manually releasing/renewing the IP

Please post a copy and paste of the modems connection status page.
Be sure the ISP provisions the modem correctly.
Be sure there are no coax cable line splitters in the between the modem and ISP service box. 
Be sure your using good quality RG6 coax cable up to the modem. 
Be sure to power OFF the modem for 1 minute then back ON.
https://community.netgear.com/t5/Cable-Modems-Routers/General-info-and-Troubleshooting-for-Cable-Mod...

 

Please do not post MAC addresses in public forums. 

 

@vkdelta 

Message 2 of 51
sen4ik
Guide

Re: ORBI CBR750 requires manually releasing/renewing the IP

Connection Status page screenshot is attached.


There are no splitters. I am using good quality coax cable. I tried powering off and on.

 

How do I make sure ISP provisions the modem correctly?

 

Message 3 of 51
FURRYe38
Guru

Re: ORBI CBR750 requires manually releasing/renewing the IP

There should be a connections status page silimar to this:

Cable Connection
Cancel Apply
Frequency start Value
This field below allows you to modify the frequency the cable modem start with its scan during initialization and registration. Enter the new start frequency and restart the cable modem for it to take effect.
Starting Frequency
837000000

Startup Procedure
Procedure Status Comment
Acquire Downstream Channel 837 MHz Locked
Connectivity State OK Operational
Boot State OK Operational
Security Enabled BPI+

Downstream Bonded Channels
Channel Lock Status Modulation Channel ID Frequency Power SNR Correctables Uncorrectables
1 Locked 256 QAM 31 837000000 Hz 0.1 dBmV 37.4 dB 0 0
2 Locked 256 QAM 1 651000000 Hz -1.6 dBmV 36.6 dB 0 0
3 Locked 256 QAM 2 657000000 Hz -1.6 dBmV 36.6 dB 0 0
4 Locked 256 QAM 3 663000000 Hz -1.3 dBmV 36.8 dB 0 0
5 Locked 256 QAM 4 669000000 Hz -1.3 dBmV 36.7 dB 0 0
6 Locked 256 QAM 5 675000000 Hz -1.1 dBmV 36.7 dB 0 0
7 Locked 256 QAM 6 681000000 Hz -0.8 dBmV 37.0 dB 0 0
8 Locked 256 QAM 8 693000000 Hz -0.5 dBmV 37.1 dB 0 0
9 Locked 256 QAM 9 699000000 Hz -0.2 dBmV 37.3 dB 0 0
10 Locked 256 QAM 10 705000000 Hz -0.2 dBmV 37.0 dB 0 0
11 Locked 256 QAM 11 711000000 Hz 0.0 dBmV 37.1 dB 0 0
12 Locked 256 QAM 12 717000000 Hz 0.4 dBmV 37.4 dB 0 0
13 Locked 256 QAM 13 723000000 Hz 0.3 dBmV 37.1 dB 0 0
14 Locked 256 QAM 14 729000000 Hz 0.6 dBmV 37.1 dB 0 0
15 Locked 256 QAM 15 735000000 Hz 0.9 dBmV 37.3 dB 0 0
16 Locked 256 QAM 16 741000000 Hz 1.0 dBmV 37.3 dB 0 0
17 Locked 256 QAM 17 753000000 Hz 1.1 dBmV 37.5 dB 0 0
18 Locked 256 QAM 18 759000000 Hz 1.0 dBmV 37.5 dB 0 0
19 Locked 256 QAM 19 765000000 Hz 0.7 dBmV 37.4 dB 0 0
20 Locked 256 QAM 20 771000000 Hz 0.8 dBmV 37.6 dB 0 0
21 Locked 256 QAM 21 777000000 Hz 0.7 dBmV 37.7 dB 0 0
22 Locked 256 QAM 22 783000000 Hz 0.6 dBmV 37.7 dB 0 0
23 Locked 256 QAM 23 789000000 Hz 0.7 dBmV 37.8 dB 0 0
24 Locked 256 QAM 24 795000000 Hz 0.5 dBmV 37.7 dB 0 0
25 Locked 256 QAM 25 801000000 Hz 0.4 dBmV 37.5 dB 0 0
26 Locked 256 QAM 26 807000000 Hz 0.5 dBmV 37.7 dB 0 0
27 Locked 256 QAM 27 813000000 Hz 0.5 dBmV 37.6 dB 0 0
28 Locked 256 QAM 28 819000000 Hz 0.1 dBmV 37.3 dB 0 0
29 Locked 256 QAM 29 825000000 Hz 0.4 dBmV 37.6 dB 0 0
30 Locked 256 QAM 30 831000000 Hz 0.2 dBmV 37.5 dB 0 0
31 Locked 256 QAM 32 843000000 Hz 0.0 dBmV 37.4 dB 0 0
32 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0

Upstream Bonded Channels
Channel Lock Status US Channel Type Channel ID Symbol Rate Frequency Power
1 Locked ATDMA 5 5120 Ksym/sec 22000000 Hz 31.5 dBmV
2 Locked ATDMA 1 5120 Ksym/sec 36000000 Hz 32.8 dBmV
3 Locked ATDMA 2 5120 Ksym/sec 29000000 Hz 31.3 dBmV
4 Locked ATDMA 6 2560 Ksym/sec 16000000 Hz 33.3 dBmV
5 Not Locked Unknown 0 0 0 0.0 dBmV
6 Not Locked Unknown 0 0 0 0.0 dBmV
7 Not Locked Unknown 0 0 0 0.0 dBmV
8 Not Locked Unknown 0 0 0 0.0 dBmV

Downstream OFDM Channels
Channel Lock
Status Modulation /
Profile ID Channel
ID Frequency Power SNR /
MER Active Subcarrier
Number Range Unerrored
Codewords Correctable
Codewords Uncorrectable
Codewords
1 Locked 0 ,1 ,2 33 547000000 Hz -3.82 dBmV 36.6 dB 1108 ~ 2987 64457020 52608446 0
2 Not Locked 0 0 0 Hz 0 dBmV 0 dB 0 ~ 4095 0 0 0

Upstream OFDMA Channels
Channel Lock Status Modulation / Profile ID Channel ID Frequency Power
1 Not Locked 0 0 0 Hz 0 dBmV
2 Not Locked 0 0 0 Hz 0 dBmV

Extended Upstream Transmit Power

Current System Time:Sat Oct 23 13:44:57 2021
System Up Time:02:07:41

Message 4 of 51
sen4ik
Guide

Re: ORBI CBR750 requires manually releasing/renewing the IP

Got it. Here you go.

 

Frequency Start Value
This field below allows you to modify the frequency the cable modem start with its scan during initialization and registration. Enter the new start frequency and restart the cable modem for it to take effect.
Starting Frequency      

Startup Procedure
ProcedureStatusComment
Acquire Downstream Channel471000000 HzLocked
Connectivity StateOkOperational
Boot StateOkOperational
SecurityEnabledBPI+
IP Provisioning ModeHonor MDDhonorMdd(4)

Downstream Bonded Channels
ChannelLock StatusModulationChannel IDFrequencyPowerSNRCorrectablesUncorrectable
1LockedQAM 2561405000000 Hz-2.5 dBmV38.9 dB60
2LockedQAM 2562411000000 Hz-2.2 dBmV38.6 dB00
3LockedQAM 2563417000000 Hz-2.5 dBmV38.9 dB00
4LockedQAM 2564423000000 Hz-2.2 dBmV38.9 dB00
5LockedQAM 2565429000000 Hz-2.4 dBmV38.9 dB00
6LockedQAM 2566435000000 Hz-2.0 dBmV38.9 dB00
7LockedQAM 2567441000000 Hz-1.7 dBmV40.3 dB00
8LockedQAM 2568447000000 Hz-1.9 dBmV40.3 dB00
9LockedQAM 2569453000000 Hz-2.0 dBmV40.3 dB00
10LockedQAM 25610459000000 Hz-2.0 dBmV38.9 dB00
11LockedQAM 25611465000000 Hz-2.0 dBmV40.9 dB00
12LockedQAM 25612471000000 Hz-2.0 dBmV40.3 dB50
13LockedQAM 25613477000000 Hz-2.0 dBmV38.9 dB10
14LockedQAM 25614483000000 Hz-1.9 dBmV38.9 dB00
15LockedQAM 25615489000000 Hz-1.9 dBmV38.9 dB00
16LockedQAM 25616495000000 Hz-1.9 dBmV38.9 dB00
17LockedQAM 25617507000000 Hz-2.0 dBmV38.9 dB00
18LockedQAM 25618513000000 Hz-2.2 dBmV38.9 dB00
19LockedQAM 25619519000000 Hz-2.5 dBmV38.9 dB00
20LockedQAM 25620525000000 Hz-2.5 dBmV38.9 dB00
21LockedQAM 25621531000000 Hz-2.7 dBmV38.9 dB00
22LockedQAM 25622537000000 Hz-2.9 dBmV38.9 dB00
23LockedQAM 25623543000000 Hz-2.9 dBmV38.9 dB00
24LockedQAM 25624549000000 Hz-3.0 dBmV38.9 dB00
25LockedQAM 25625555000000 Hz-3.0 dBmV38.9 dB00
26LockedQAM 25626561000000 Hz-3.0 dBmV38.9 dB00
27LockedQAM 25627567000000 Hz-3.5 dBmV38.9 dB00
28LockedQAM 25628573000000 Hz-3.5 dBmV38.6 dB00
29LockedQAM 25629579000000 Hz-3.7 dBmV38.9 dB00
30LockedQAM 25630585000000 Hz-3.7 dBmV38.6 dB00
31LockedQAM 25631591000000 Hz-3.5 dBmV38.9 dB00
32LockedQAM 25632597000000 Hz-3.9 dBmV38.9 dB00

Upstream Bonded Channels
ChannelLock StatusUS Channel TypeChannel IDSymbol RateFrequencyPower
1LockedATDMA15120 Ksym/sec16400000 Hz46.5 dBmV
2LockedATDMA25120 Ksym/sec22800000 Hz46.3 dBmV
3LockedATDMA35120 Ksym/sec29200000 Hz46.8 dBmV
4LockedATDMA45120 Ksym/sec35600000 Hz47.3 dBmV
5LockedATDMA51280 Ksym/sec39600000 Hz43.8 dBmV
6Not LockedN/AUnknown0 Ksym/sec0 Hz0.0 dBmV
7Not LockedN/AUnknown0 Ksym/sec0 Hz0.0 dBmV
8Not LockedN/AUnknown0 Ksym/sec0 Hz0.0 dBmV

Downstream OFDM Channels
ChannelLock StatusModulation/Profile IDChannel IDFrequencyPowerSNR/MERActive Subcarrier
Number Range
Unerrored
Codewords
Correctable
Codewords
Uncorrectable
Codewords
1Locked1193850000000 Hz-6.0 dBmV39.9 dB1108~2987000
2Not Locked000 Hz0.0 dBmV0.0 dB0~4095000

Upstream OFDMA Channels
ChannelLock StatusModulation/Profile IDChannel IDFrequencyPower
1Not Locked000 Hz0.0 dBmV
2Not Locked000 Hz0.0 dBmV

Current System Time: Sat Oct 23 12:52:23 2021
System Up Time 1 days 02:01:52
Message 5 of 51
FURRYe38
Guru

Re: ORBI CBR750 requires manually releasing/renewing the IP

Great. 

Do you have a snippet of the Events Log page as well? 

 

Message 6 of 51
sen4ik
Guide

Re: ORBI CBR750 requires manually releasing/renewing the IP

 

 
TimePriorityDescription
Oct 21 2021 13:12:30Warning (5)MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1
Oct 21 2021 13:12:30Warning (5)MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1
Oct 21 2021 13:12:30Warning (5)MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1
Oct 21 2021 13:12:30Warning (5)MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1
Oct 21 2021 13:12:30Warning (5)MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1
Oct 21 2021 13:12:30Warning (5)MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1
Oct 21 2021 13:12:30Warning (5)MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1
Oct 21 2021 13:12:30Notice (6)TLV-11 - unrecognized OID
Oct 21 2021 13:12:30Critical (3)Config File Rejected due to Invalid or Unexpected TLV 11
Oct 21 2021 13:12:32Warning (5)RNG-RSP CCAP Commanded Power in Excess of 6 dB Below the Value Corresponding to the Top of the DRW
Oct 21 2021 13:12:49Alert (2)CM Certificate Error
Oct 21 2021 16:21:53Warning (5)MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1
Oct 21 2021 16:21:54Notice (6)TLV-11 - unrecognized OID
Oct 21 2021 16:21:54Critical (3)Config File Rejected due to Invalid or Unexpected TLV 11
Oct 21 2021 16:21:57Warning (5)RNG-RSP CCAP Commanded Power in Excess of 6 dB Below the Value Corresponding to the Top of the DRW
Oct 21 2021 16:22:14Alert (2)CM Certificate Error
Oct 21 2021 19:55:41Warning (5)MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1
Oct 21 2021 19:55:42Notice (6)TLV-11 - unrecognized OID
Oct 21 2021 19:55:42Critical (3)Config File Rejected due to Invalid or Unexpected TLV 11
Oct 21 2021 19:55:45Warning (5)RNG-RSP CCAP Commanded Power in Excess of 6 dB Below the Value Corresponding to the Top of the DRW
Oct 21 2021 19:56:03Alert (2)CM Certificate Error
Oct 21 2021 21:17:03Critical (3)No Ranging Response received - T3 time-out
Oct 22 2021 09:05:12Warning (5)MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1
Oct 22 2021 09:05:13Notice (6)TLV-11 - unrecognized OID
Oct 22 2021 09:05:13Critical (3)Config File Rejected due to Invalid or Unexpected TLV 11
Oct 22 2021 09:05:16Warning (5)RNG-RSP CCAP Commanded Power in Excess of 6 dB Below the Value Corresponding to the Top of the DRW
Oct 22 2021 09:05:28Alert (2)CM Certificate Error
Oct 22 2021 10:51:30Warning (5)MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1
Oct 22 2021 10:51:31Notice (6)TLV-11 - unrecognized OID
Oct 22 2021 10:51:31Critical (3)Config File Rejected due to Invalid or Unexpected TLV 11
Oct 22 2021 10:51:34Warning (5)RNG-RSP CCAP Commanded Power in Excess of 6 dB Below the Value Corresponding to the Top of the DRW
Oct 22 2021 10:51:51Alert (2)CM Certificate Error
Oct 22 2021 12:15:16Critical (3)No Ranging Response received - T3 time-out
Oct 22 2021 14:39:51Alert (2)CM Certificate Error
Oct 22 2021 15:12:17Critical (3)No Ranging Response received - T3 time-out
Oct 23 2021 12:57:46Warning (5)MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1
Oct 23 2021 12:57:47Notice (6)TLV-11 - unrecognized OID
Oct 23 2021 12:57:47Critical (3)Config File Rejected due to Invalid or Unexpected TLV 11
Oct 23 2021 12:57:50Warning (5)RNG-RSP CCAP Commanded Power in Excess of 6 dB Below the Value Corresponding to the Top of the DRW
Oct 23 2021 12:58:07Alert (2)CM Certificate Error
Oct 23 2021 13:04:30Warning (5)MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1
Oct 23 2021 13:04:31Notice (6)TLV-11 - unrecognized OID
Oct 23 2021 13:04:31Critical (3)Config File Rejected due to Invalid or Unexpected TLV 11
Oct 23 2021 13:04:34Warning (5)RNG-RSP CCAP Commanded Power in Excess of 6 dB Below the Value Corresponding to the Top of the DRW
Oct 23 2021 13:04:51Alert (2)CM Certificate Error
Oct 23 2021 17:24:41Critical (3)No Ranging Response received - T3 time-out
Message 7 of 51
FURRYe38
Guru

Re: ORBI CBR750 requires manually releasing/renewing the IP

One item you need to ask your ISP about:

These shouldn't be seen in the logs I believe. Maybe why the CBR can't get a seamless connection and can't get a IP address seamlessly from the ISP. The ISP needs to ensure the CBR is getting the config file correctly. Have them check the events log on the CBR as well. 

Critical (3) Config File Rejected due to Invalid or Unexpected TLV 11"
Message 8 of 51
Triggs21
Star

Re: ORBI CBR750 requires manually releasing/renewing the IP

Any fix on this yet... my system is doing the same thing.
Message 9 of 51
sen4ik
Guide

Re: ORBI CBR750 requires manually releasing/renewing the IP

My system just randomly started working. I assume something was up on the Xfinity side. Sorry I don't have any details, I honestly have no idea why it started working.

Message 10 of 51
Triggs21
Star

Re: ORBI CBR750 requires manually releasing/renewing the IP

Can you be alittle more specific. I have xfinity as well. What issues were you having. And what did you change, and when was the last signal drop you had...
Message 11 of 51
FURRYe38
Guru

Re: ORBI CBR750 requires manually releasing/renewing the IP

I would presume the ISP had done someting on there side. Most of the time this is a ISP signal issue. If the signals and configuration are not done well or with in specs on the ISP side, makes it hard for ANY modem to work right. 


@sen4ik wrote:

My system just randomly started working. I assume something was up on the Xfinity side. Sorry I don't have any details, I honestly have no idea why it started working.


 

Message 12 of 51
Triggs21
Star

Re: ORBI CBR750 requires manually releasing/renewing the IP

Thats interesting. Im having the same issue i did before my rma. This model still will not stay connected to xfinity without dropping connectivity. Is there anything I can do to verify isp signal problem? Xfinity has been here several times verifying the signal. Interestingly enough once I connect my older cbr (docsis 3.0) it works fine no disconnects no issues... help
Message 13 of 51
FURRYe38
Guru

Re: ORBI CBR750 requires manually releasing/renewing the IP

Please post a copy and paste of the modems Connection Status page and Event Log page.


@Triggs21 wrote:
Thats interesting. Im having the same issue i did before my rma. This model still will not stay connected to xfinity without dropping connectivity. Is there anything I can do to verify isp signal problem? Xfinity has been here several times verifying the signal. Interestingly enough once I connect my older cbr (docsis 3.0) it works fine no disconnects no issues... help




 

Message 14 of 51
sen4ik
Guide

Re: ORBI CBR750 requires manually releasing/renewing the IP

@Triggs21 The issue is described in the initial post. I had an issue for about a week, and than it self healed. I didn't do anything to fix it.

Message 15 of 51
Triggs21
Star

Re: ORBI CBR750 requires manually releasing/renewing the IP

Startup Procedure
ProcedureStatusComment
Acquire Downstream Channel519000000 HzLocked
Connectivity StateOkOperational
Boot StateOkOperational
SecurityEnabledBPI+
IP Provisioning ModeHonor MDDhonorMdd(4)

Downstream Bonded Channels
ChannelLock StatusModulationChannel IDFrequencyPowerSNRCorrectablesUncorrectable
1LockedQAM 25610495000000 Hz13.1 dBmV40.3 dB00
2LockedQAM 25611507000000 Hz13.0 dBmV40.3 dB60
3LockedQAM 25612513000000 Hz13.1 dBmV40.3 dB00
4LockedQAM 25613519000000 Hz13.1 dBmV40.9 dB00
5LockedQAM 25614525000000 Hz13.0 dBmV40.3 dB00
6LockedQAM 25615531000000 Hz13.0 dBmV40.3 dB00
7LockedQAM 25616537000000 Hz13.0 dBmV40.3 dB00
8LockedQAM 25617543000000 Hz12.8 dBmV40.3 dB00
9LockedQAM 25618549000000 Hz12.6 dBmV40.3 dB00
10LockedQAM 25619561000000 Hz12.8 dBmV40.3 dB00
11LockedQAM 25620567000000 Hz12.6 dBmV40.3 dB00
12LockedQAM 25621573000000 Hz12.5 dBmV40.3 dB00
13LockedQAM 25622579000000 Hz12.5 dBmV40.3 dB00
14LockedQAM 25623585000000 Hz12.5 dBmV38.9 dB00
15LockedQAM 25624591000000 Hz12.1 dBmV40.3 dB00
16LockedQAM 25625597000000 Hz12.0 dBmV40.3 dB00
17LockedQAM 25626603000000 Hz12.5 dBmV38.9 dB20
18LockedQAM 25627609000000 Hz12.3 dBmV38.9 dB10
19LockedQAM 25628615000000 Hz12.4 dBmV38.9 dB00
20LockedQAM 25629621000000 Hz12.3 dBmV38.9 dB30
21LockedQAM 25630627000000 Hz12.4 dBmV38.9 dB170
22LockedQAM 25631633000000 Hz12.1 dBmV38.6 dB50
23LockedQAM 25632639000000 Hz12.0 dBmV38.9 dB00
24LockedQAM 25634645000000 Hz12.0 dBmV38.9 dB00
25LockedQAM 25635651000000 Hz11.8 dBmV38.9 dB00
26LockedQAM 25636657000000 Hz11.5 dBmV38.9 dB00
27LockedQAM 25637663000000 Hz11.0 dBmV38.6 dB00
28LockedQAM 25638669000000 Hz10.9 dBmV38.9 dB00
29LockedQAM 25639675000000 Hz11.0 dBmV38.6 dB00
30LockedQAM 25640681000000 Hz10.8 dBmV38.9 dB00
31LockedQAM 25641687000000 Hz10.3 dBmV38.6 dB00
32Not LockedN/AN/A0 Hz0.0 dBmV0.0 dB00

Upstream Bonded Channels
ChannelLock StatusUS Channel TypeChannel IDSymbol RateFrequencyPower
1LockedATDMA445120 Ksym/sec17300000 Hz39.0 dBmV
2LockedATDMA435120 Ksym/sec23700000 Hz38.8 dBmV
3LockedATDMA425120 Ksym/sec30100000 Hz39.3 dBmV
4LockedATDMA415120 Ksym/sec36500000 Hz40.5 dBmV
5Not LockedN/AUnknown0 Ksym/sec0 Hz0.0 dBmV
6Not LockedN/AUnknown0 Ksym/sec0 Hz0.0 dBmV
7Not LockedN/AUnknown0 Ksym/sec0 Hz0.0 dBmV
8Not LockedN/AUnknown0 Ksym/sec0 Hz0.0 dBmV

Downstream OFDM Channels
ChannelLock StatusModulation/Profile IDChannel IDFrequencyPowerSNR/MERActive Subcarrier
Number Range
Unerrored
Codewords
Correctable
Codewords
Uncorrectable
Codewords
1Locked333693000000 Hz10.3 dBmV39.2 dB1108~2987000
2Not Locked000 Hz0.0 dBmV0.0 dB0~4095000

Upstream OFDMA Channels
ChannelLock StatusModulation/Profile IDChannel IDFrequencyPower
1Not Locked000 Hz0.0 dBmV
2Not Locked000 Hz0.0 dBmV

Current System Time: Sun Oct 31 16:08:44 2021
System Up Time 00:25:22
Message 16 of 51
Triggs21
Star

Re: ORBI CBR750 requires manually releasing/renewing the IP

TimePriorityDescription
Oct 31 2021 15:31:34Notice (6)CM-STATUS message sent. Event Type Code: 2
Oct 31 2021 15:31:34Notice (6)CM-STATUS message sent. Event Type Code: 2
Oct 31 2021 15:31:34Notice (6)CM-STATUS message sent. Event Type Code: 2
Oct 31 2021 15:31:34Notice (6)CM-STATUS message sent. Event Type Code: 2
Oct 31 2021 15:31:34Notice (6)CM-STATUS message sent. Event Type Code: 2
Oct 31 2021 15:31:44Critical (3)SYNC Timing Synchronization failure - Loss of Sync
Oct 31 2021 15:31:45Notice (6)CM-STATUS message sent. Event Type Code: 5
Oct 31 2021 15:31:53Critical (3)SYNC Timing Synchronization failure - Loss of Sync
Oct 31 2021 15:31:53Notice (6)CM-STATUS message sent. Event Type Code: 5
Oct 31 2021 15:31:53Critical (3)SYNC Timing Synchronization failure - Loss of Sync
Oct 31 2021 15:31:53Notice (6)CM-STATUS message sent. Event Type Code: 2
Oct 31 2021 15:31:54Critical (3)SYNC Timing Synchronization failure - Loss of Sync
Oct 31 2021 15:31:55Notice (6)CM-STATUS message sent. Event Type Code: 5
Oct 31 2021 15:32:04Critical (3)SYNC Timing Synchronization failure - Loss of Sync
Oct 31 2021 15:32:05Notice (6)CM-STATUS message sent. Event Type Code: 5
Oct 31 2021 15:32:19Critical (3)SYNC Timing Synchronization failure - Loss of Sync
Oct 31 2021 15:32:21Notice (6)CM-STATUS message sent. Event Type Code: 5
Oct 31 2021 15:32:24Critical (3)SYNC Timing Synchronization failure - Loss of Sync
Oct 31 2021 15:32:25Notice (6)CM-STATUS message sent. Event Type Code: 2
Oct 31 2021 15:32:26Critical (3)SYNC Timing Synchronization failure - Loss of Sync
Oct 31 2021 15:32:26Notice (6)CM-STATUS message sent. Event Type Code: 5
Oct 31 2021 15:32:31Critical (3)SYNC Timing Synchronization failure - Loss of Sync
Oct 31 2021 15:32:43Notice (6)CM-STATUS message sent. Event Type Code: 5
Oct 31 2021 15:32:44Warning (5)Lost MDD Timeout
Oct 31 2021 15:32:44Notice (6)CM-STATUS message sent. Event Type Code: 2
Oct 31 2021 15:32:44Critical (3)SYNC Timing Synchronization failure - Loss of Sync
Oct 31 2021 15:32:50Notice (6)CM-STATUS message sent. Event Type Code: 2
Oct 31 2021 15:32:50Critical (3)SYNC Timing Synchronization failure - Loss of Sync
Oct 31 2021 15:32:50Notice (6)CM-STATUS message sent. Event Type Code: 2
Oct 31 2021 15:32:53Critical (3)SYNC Timing Synchronization failure - Loss of Sync
Oct 31 2021 15:32:59Notice (6)CM-STATUS message sent. Event Type Code: 4
Oct 31 2021 15:33:02Critical (3)SYNC Timing Synchronization failure - Loss of Sync
Oct 31 2021 15:33:02Warning (5)Lost MDD Timeout
Oct 31 2021 15:33:04Notice (6)CM-STATUS message sent. Event Type Code: 4
Oct 31 2021 15:33:37Critical (3)Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out
Oct 31 2021 15:34:01Notice (6)CM-STATUS message sent. Event Type Code: 6
Oct 31 2021 15:34:04Critical (3)Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out
Oct 31 2021 15:34:15Notice (6)CM-STATUS message sent. Event Type Code: 6
Oct 31 2021 15:34:28Critical (3)Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out
Oct 31 2021 15:34:51Notice (6)CM-STATUS message sent. Event Type Code: 6
Oct 31 2021 15:44:21Warning (5)MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1
Oct 31 2021 15:44:21Notice (6)TLV-11 - unrecognized OID
Oct 31 2021 15:44:21Critical (3)Config File Rejected due to Invalid or Unexpected TLV 11
Oct 31 2021 15:44:36Alert (2)CM Certificate Error
Message 17 of 51
Triggs21
Star

Re: ORBI CBR750 requires manually releasing/renewing the IP

Be aware the event log may show inconsistancys due to me unplugging the router and switching coax from the splitter now directly plugged in (no splitter) to see if that makes a difference with dropping internet service

Message 18 of 51
FURRYe38
Guru

Re: ORBI CBR750 requires manually releasing/renewing the IP

Ok, Please post a Event log after a while of the CBR being online with out any wire changes. 

 

The Power on the status page maybe too high.

Mines at 0.1dbm range or -1.#Dbm on a few channels on my cable modem.

 

You might ask the ISP to maybe turn down the power to the modem some. 

@vkdelta 

Message 19 of 51
sen4ik
Guide

Re: ORBI CBR750 requires manually releasing/renewing the IP

And I am back to manually releasing/renewing IP again. Same things as was described in the initial post.

Horrible experience. Especially knowing that the modem I bought is very expensive.

Message 20 of 51
Triggs21
Star

Re: ORBI CBR750 requires manually releasing/renewing the IP

Ive tried almost everything I can think of..

Plus i am a IT technician so if I cant figure it out im just left to assume we all purchased a **bleep** model orbi. This is my Rma that came shipped with a totally different firmware and im still having the same connection issues that everyone else describes, amazon is flooded with negative reviews on this model orbi as well.

My older Rbk docsis 3.0 orbi works completely fine with no issues on the same coax line.

Technically I shouldn't have to do or change any settings to get this new one to work stable, it should work as advertised just like it did when i first bought it 6 months or so ago.

We dont expect something to just stop working reliably after afew months of usage, especially from a company ive never had an issue with.

Is this new firmware gonna save my 600 dollar paperweight??

Sorry for the rant just so hard to believe there is no saving this extremely expensive setup!!
Message 21 of 51
FURRYe38
Guru

Re: ORBI CBR750 requires manually releasing/renewing the IP

Have you updated to v8 yet? 

https://community.netgear.com/t5/Orbi-with-Built-in-Cable-Modem/New-CBR750-Firmware-Version-4-6-5-8-...


@sen4ik wrote:

And I am back to manually releasing/renewing IP again. Same things as was described in the initial post.

Horrible experience. Especially knowing that the modem I bought is very expensive.


 

Message 22 of 51
Triggs21
Star

Re: ORBI CBR750 requires manually releasing/renewing the IP

No it kept dropping internet so I had to switch back to my old rbr since my wife works from home... ill have to wait until the weekend to reconnect it and update.
Message 23 of 51
sen4ik
Guide

Re: ORBI CBR750 requires manually releasing/renewing the IP

I have updated to the new V4.6.5.8 firmware, and it still drops every 1.5 hours. I am opening a ticket with Netgear to see if maybe they can help.

Message 24 of 51
sen4ik
Guide

Re: ORBI CBR750 requires manually releasing/renewing the IP

Called Netgear support.

They told me to change the MTU size to 1486, but they couldn't explain why I should do it.

They told me to update CTS/RTS Threshold to 2347.

And they told me to update wireless channels to the highest number for each channel.

They told me this will fix my issue, which it will not. The issue lays somewhere else other than just tweaking the above.

I will wait another hour for the internet to drop, and will call support again hoping they will take me to the Tier 2 support.

Message 25 of 51
Top Contributors
Discussion stats
  • 50 replies
  • 4877 views
  • 14 kudos
  • 6 in conversation
Announcements

Orbi WiFi 7