Can I have 3 VLANs in ORBI RBR50

[ShadowHead]

Gents / Ladies:

Cross linking this post from PFSense forum. I am curious if anyone has succeeded in getting 3 VLANS working on RBR50 in Router Mode. See attached network diagram. I seem to be able to get the default VLAN ( and wireless devices) under one network, and VLAN3 working in port 3 with some appropriate IP addresses 192.168.3.x.

However, PORT 2 does not seem to route to VLAN2 and provision dhcp addresses in the 192.168.2.x range.

This is the post from PFSense on the isse at hand,  

https://forum.netgate.com/topic/153192/dhcpnak-or-offer-in-vlans/2

Can ORBI work in this way ?

[FURRYe38]

I don't believe so:

https://community.netgear.com/t5/Orbi/But-Orbi-DOES-have-Vlan-tagging/m-p/1811882#M72812

[ShadowHead]

Ok, thank you. Looks like it is not really VLAN support in ap roper way, just a 1 VLAN passthrough for IPTV. Thank you, wish I asked sooner. Wasted about 6 hours "playing" with this, even decending into Wireshark to take a look at the packets. 

[FURRYe38]

Good luck. 

[HomerMitchell]

Exactly what I needed! You just saved me several hours. Thanks!

mcdvoice login