Reply
Luminary

Is 2.1.3.4 in auto update.

@AmitR
I can confirm, we've begun pushing 2.1.3.4 available for auto-upgrade. Feel free to upgrade using mobile app / WebUI.



Orbi Product Management

However I check my Orbi it is not showing the update. Mine is still 2.1.2.18
Model: RBK53| Orbi Router + 2 Satellites Orbi WiFi System
Message 1 of 14
Guru

Re: Is 2.1.3.4 in auto update.

Even after selecting for check update?

 

You can manually update as well. Please do a factory reset on both router and satellite(s) then set up from scratch if you upgrade the FW.

I recommend using IE11 or FF browsers for this. Be ethernet wired with the router and satellite when doing the update. Update the Satellite first, then router.


@OrbiMan wrote:
@AmitR
I can confirm, we've begun pushing 2.1.3.4 available for auto-upgrade. Feel free to upgrade using mobile app / WebUI.



Orbi Product Management

However I check my Orbi it is not showing the update. Mine is still 2.1.2.18

 

My Setup (Cable 1Gbps/50Mbps)>CM1200(LAG Disabled)>RBK853 v3.2.16.22
RBK50 v2.7.2.102
Additional NG HW: C7800/CM1100/CAX80/CM2000, Orbi CBK40, R7800, R7960P, EX7500/EX7700, XR450 and WNHDE111
Message 2 of 14
Virtuoso

Re: Is 2.1.3.4 in auto update.

For some reason, NG does not have v2.1.3.4 listed in the RBK53 product.

 

See http://www.netgear.com/support/product/RBK53.aspx#download

Message 3 of 14
Virtuoso

Re: Is 2.1.3.4 in auto update.


@OrbiMan wrote:
However I check my Orbi it is not showing the update. Mine is still 2.1.2.18

Mine is not showing either (RBK53) and I have checked in the UI several times with different browsers. 

 

Funny thing is it was showing several days ago and I just figured it would auto-update as per usual. However, they auto-update never did happen and now the UI shows no new firmware version. I'm still on v2.1.2.18, which is fine since I have zero issues with it.

Message 4 of 14
Retired_Member
Not applicable

Re: Is 2.1.3.4 in auto update.

i still don't have 2.1.3.4

Message 5 of 14
Luminary

Re: Is 2.1.3.4 in auto update.

They pulled the latest beta off the auto update list, which since it is a beta, I'm not sure why they put it on there in the first place.  Thats also the reason it isn't available via the download page for the various models, its a beta.

 

I didn't have any real issues with 2.1.2.X, so I waited till 3 of my 4 devices had beta firmware available for them before I tried it out.

 

My RBS50Y is still on 2.1.2.20, but seems to be working fine with the rest of the things on the latest beta, 2.1.3.X

Message 6 of 14
Virtuoso

Re: Is 2.1.3.4 in auto update.


@loomis1975 wrote:

They pulled the latest beta off the auto update list, which since it is a beta, I'm not sure why they put it on there in the first place.  Thats also the reason it isn't available via the download page for the various models, its a beta.


Yeah, my point was that it is just awfully strange that v2.1.3.4 appears on the download page for RBK50 but not for RBK53 nor RBR50. The only reasonable presumption is an oversight.

Message 7 of 14
Luminary

Re: Is 2.1.3.4 in auto update.


@tagteam wrote:

@loomis1975 wrote:

They pulled the latest beta off the auto update list, which since it is a beta, I'm not sure why they put it on there in the first place.  Thats also the reason it isn't available via the download page for the various models, its a beta.


Yeah, my point was that it is just awfully strange that v2.1.3.4 appears on the download page for RBK50 but not for RBK53 nor RBR50. The only reasonable presumption is an oversight.


I think you are right.  When they pulled 2.1.3.4 off auto update, they should have pulled it off the RBK50 product page as well.

Message 8 of 14
Retired_Member
Not applicable

Re: Is 2.1.3.4 in auto update.

 Model NameDevice NameCurrent VersionStatus
RouterRBR50RBR50V2.0.1.4No new firmware version available.
SatelliteRBS50RBS50V2.0.1.4No new firmware version available.
SatelliteRBS50RBS50V2.0.1.4No new firmware version available.

@OrbiMan wrote:
@AmitR
I can confirm, we've begun pushing 2.1.3.4 available for auto-upgrade. Feel free to upgrade using mobile app / WebUI.



Orbi Product Management

However I check my Orbi it is not showing the update. Mine is still 2.1.2.18
Message 9 of 14
Guide

Re: Is 2.1.3.4 in auto update.

Ditto

Message 10 of 14
NETGEAR Moderator

Re: Is 2.1.3.4 in auto update.

You can find the links to the firmware here in this thread

 

https://community.netgear.com/t5/Orbi/Orbi-MR-2-1-Update-3-23-18/td-p/1533584

 

Right now the firmware is not on the auto update sever until the engineers agree it is completely ready to be pushed to all systems.

 

DarrenM

Message 11 of 14
Retired_Member
Not applicable

Re: Is 2.1.3.4 in auto update.


@DarrenM wrote:

You can find the links to the firmware here in this thread

 

https://community.netgear.com/t5/Orbi/Orbi-MR-2-1-Update-3-23-18/td-p/1533584

 

Right now the firmware is not on the auto update sever until the engineers agree it is completely ready to be pushed to all systems.

 

DarrenM


Does Netgear recommend a factory reset after a auto-update to the new FW?

Message 12 of 14
NETGEAR Moderator

Re: Is 2.1.3.4 in auto update.

If you are experiencing issues yes I suggest a factory reset.

 

DarrenM

Message 13 of 14
Retired_Member
Not applicable

Re: Is 2.1.3.4 in auto update.


@DarrenM wrote:

If you are experiencing issues yes I suggest a factory reset.

 

DarrenM


thanks.....so when is 2.1.3.4 in auto update.???

Message 14 of 14
Top Contributors
Discussion stats
  • 13 replies
  • 2657 views
  • 3 kudos
  • 7 in conversation
Announcements