Reply

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

gr8sho
Virtuoso

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

Sorry, not a valid excuse. Sure security fixes matter, but present them to me and let me schedule the update on my own time. I don’t think it’s unreasonable expectation.

Cheers.

Orbi RBK50 in AP mode, 100/20 Mbps VDSL2, Arris BGW210 gateway

Message 351 of 392
binventive
Luminary

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

 


@orbilov wrote:
May not feel/seem like it but forced updates is for Security against constant cat and mouse between hackers IOT devices that include routers and AP devices.

Security updates are important, but I think they should be separated from bug fixes/enhancements/general updates whenever possible. Perhaps critical security updates should be deemed as being "required" and applied automatically (assuming they have been tested thoroughly beforehand), and other fixes/updates should be optional in terms of when they are installed. That is generally how it was done when I managed patching for a company I worked for before I retired. Due to corporate auditing requirements, we were forced to apply critical security updates on at least a monthly basis (sometimes more frequently if some updates were deemed important enough). But, we were allowed to update non-security-related patches on a more as-needed basis. Anyway, the various Netgear wireless routers are primarily for the non-enterprise home market, so providing more granular control over management of updates is probably not something they will do. 

Message 352 of 392
KingJamesKing
Luminary

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

The MAC address that is denied is the satellite address not a MAC address of something trying to connect to WiFi. The particular satellite in question always appears to be connected.


@FURRYe38 wrote:

Something trying to access your wifi network incorrectly? 

I would turn off all wireless devices, then clear the logs on the RBR. Then turn on 1 by 1 yoru wireless devices and see if the logs pick up anything...


@KingJamesKing wrote:

I have been running 2.3.1.44 for a while now and noticing these messages in log. These are coming from Satellite 2 Mac address. Any ideas? 

 

Tuesday, April 09, 2019 10:25:19
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61

 

i have RBR53 one router and two satellites


 


 

I think others see this error as well seems to be a bug but not sure if it affecting anything.

Message 353 of 392
KingJamesKing
Luminary

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44


@FURRYe38 wrote:

Hows was your system updated? Auto update or did you manually update with FW files? 

Update and continue or factory reset and setup from scratch after the update? 


@KingJamesKing wrote:

I have been running 2.3.1.44 for a while now and noticing these messages in log. These are coming from Satellite 2 Mac address. Any ideas? 

 

Tuesday, April 09, 2019 10:25:19
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61

 

i have RBR53 one router and two satellites


I manually updated to .32 then it auto updated to .44


 

Message 354 of 392
FURRYe38
Guru

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

You might manually re-load v44, factory reset, then setup again...


@KingJamesKing wrote:

@FURRYe38 wrote:

Hows was your system updated? Auto update or did you manually update with FW files? 

Update and continue or factory reset and setup from scratch after the update? 


@KingJamesKing wrote:

I have been running 2.3.1.44 for a while now and noticing these messages in log. These are coming from Satellite 2 Mac address. Any ideas? 

 

Tuesday, April 09, 2019 10:25:19
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61

 

i have RBR53 one router and two satellites


I manually updated to .32 then it auto updated to .44


 


 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM1200 Modem |  Wifi Router Orbi RBK853 (Router Mode), Wired Backhaul and RBK752 | Switches NG GS105/8, GS308v3, GS110MX and XS505M | 

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700

Message 355 of 392
SW_
Prodigy
Prodigy

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

@gr8sho wrote:

 

The one thing that strikes me about this response is the lack of confidence in the Orbi product.

 

Even with the recent firmware hiccups I've seen, Orbi in router mode still comes out way ahead of the ISPs router in terms of stability.

Yes, you are right. I lack confident in all routers, not just Orbi.  It's also the reason I have 3 R7900P from Costco standing by in case the existing/Orbi routers HW fail. If you rely on Internet for your business/work/homeworks/etc., you don't want to have a single point of failure. It's always better to have a backup to failover to, including the standalone cable modem itself. The one thing that I could not protect my network from is power outage. 🙂

Message 356 of 392
Dan407
Luminary

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

so i am having the same issue and some of you guys. Recently purchased a refurb RBK50 unit with a satellite. At the initial setup, everything works fine, i see the satellite online and all the devices connected to it. Then when i log into the app again the next day or so the satellite shows offline. I logged into the orbi web portal and it does show that the satellite is online and even shows the devices connected to it. 

Functionality wise, i can confirm that the wired devices connected to the satellite work without any issues. I also see the wireless devices connected to the satellite on the website but on the app i see them connected to the main router. 

So what's going on? Should i just leave it be or get another unit? Can this issue be fixed? I am trying to figue out what my optimum (service provider) modem address is. I don't think i have access to that....anyone with Optimum online experience please chime in. 

Thanks !

Message 357 of 392
FURRYe38
Guru

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

What Firmware is currently loaded?
What is the Mfr and model# of the ISP modem the NG router is connected too?

Is the Orbi system operating in Router or AP mode?

 

Logging to the mobile Orbi app or the Orbis web page with a browser? 

 

Try disabling the following and see:
Daisy Chain


@Dan407 wrote:

so i am having the same issue and some of you guys. Recently purchased a refurb RBK50 unit with a satellite. At the initial setup, everything works fine, i see the satellite online and all the devices connected to it. Then when i log into the app again the next day or so the satellite shows offline. I logged into the orbi web portal and it does show that the satellite is online and even shows the devices connected to it. 

Functionality wise, i can confirm that the wired devices connected to the satellite work without any issues. I also see the wireless devices connected to the satellite on the website but on the app i see them connected to the main router. 

So what's going on? Should i just leave it be or get another unit? Can this issue be fixed? I am trying to figue out what my optimum (service provider) modem router is. I don't think i have access to that....anyone with Optimum online experience please chime in. 

Thanks !


 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM1200 Modem |  Wifi Router Orbi RBK853 (Router Mode), Wired Backhaul and RBK752 | Switches NG GS105/8, GS308v3, GS110MX and XS505M | 

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700

Message 358 of 392
Dan407
Luminary

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

@FURRYe38 

 

both devices show version 2.3.1.44 on the app.

modem is Arris TM822

Orbi is in router mode. I tried the AP mode before and all hell broke loose. I finally had to reconnect my old router to get internet access and then redid the Orbi setup.

 

Im loggin into both the app and website. Website shows online with connected devices. App shows offline.

 

Daisy chain is off

Message 359 of 392
FURRYe38
Guru

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

Ok, your ISP modem is only a modem so no built in wifi and router here. Thus the Orbi needs to be in router mode when connected to the ISP Modem. 

 

Ensure your app is up to date as well. 

Might post about this in the Orbi app forum:

https://community.netgear.com/t5/Orbi-App/bd-p/en-home-orbi-app


@Dan407 wrote:

@FURRYe38 

 

both devices show version 2.3.1.44 on the app.

modem is Arris TM822

Orbi is in router mode. I tried the AP mode before and all hell broke loose. I finally had to reconnect my old router to get internet access and then redid the Orbi setup.

 

Im loggin into both the app and website. Website shows online with connected devices. App shows offline.

 

Daisy chain is off


 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM1200 Modem |  Wifi Router Orbi RBK853 (Router Mode), Wired Backhaul and RBK752 | Switches NG GS105/8, GS308v3, GS110MX and XS505M | 

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700

Message 360 of 392
KingJamesKing
Luminary

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44


@FURRYe38 wrote:

You might manually re-load v44, factory reset, then setup again...


@KingJamesKing wrote:

@FURRYe38 wrote:

Hows was your system updated? Auto update or did you manually update with FW files? 

Update and continue or factory reset and setup from scratch after the update? 


@KingJamesKing wrote:

I have been running 2.3.1.44 for a while now and noticing these messages in log. These are coming from Satellite 2 Mac address. Any ideas? 

 

Tuesday, April 09, 2019 10:25:19
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61

 

i have RBR53 one router and two satellites


I manually updated to .32 then it auto updated to .44


 


 



I did the reset on the satellite, poerwed off removed it, powered on with reset pushed. Now instead of one of the messages per day the log records them constantly.

9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 17:59:16
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 17:54:05
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 15:27:17
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 15:12:10
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 14:53:24
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 14:27:14
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 14:14:45
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 13:59:08
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 13:37:41

 

Message 361 of 392
AlienMindBender
Luminary

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

I had purchsed my RBK-53 from Costco last month. It was on firmware version 1.4.0.18, and would never find new updates. I had not disabled auto-updates. I began checking into updates, and found a recommendation to go to 2.0.0.74, then follow Netgear's release notes to update to 2.2.1.212 prior to the latest 2.3.1.32 or .44 updates.

 

I updated the satellites, then the router to 2.0.0.74. The administration page showed a small banner that a new firmware was available. I didn't think at the time to disconnect from the Internet, though I'd already downloaded all the necessary firmware packages. I then began the install on one satellite to 2.2.1.212. However, after the update on that first satellite completed, I was not able to reach the router or either satellite for a few minutes. When it finally came back online, the router and both satellites displayed 2.3.1.44.

 

So far, everything seems stable despite the router not following Netgear's own "required" step of going to 2.2.1.212 before the current version. I'll have to monitor and see what changes.

Message 362 of 392
SW_
Prodigy
Prodigy

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

@KingJamesKing

 

If you are running out of option, go to the Satellite telnet terminal, type:

        1. config default

        2. config commit

        3. reboot

 

After the Satellite comes back online and establishes "Good" backhaul connection, check the logs again.  If you see the same error messages, then try generating a new "Backhaul Password" and see if that helps.

 

Good luck!

Message 363 of 392
CrimpOn
Guru

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44


@AlienMindBender wrote:

So far, everything seems stable despite the router not following Netgear's own "required" step of going to 2.2.1.212 before the current version. I'll have to monitor and see what changes.


The requirement to upgrade to version 212 first was directed at users who wanted to manually update Orbi firmware.  When Netgear performs firmware upgrades themselves, we have no idea how many "steps" they went through.  All we see is that a while ago the Orbi was on one firmware and now it is on a newer one.  How they got there is invisible to us.

I love my Orbi.
Message 364 of 392
FURRYe38
Guru

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

After v74 was applied to the RBS and then RBR, you can directly update the RBS to v44. Not need to load an intermediate version. v212 will be needed to go from v74 to v44 on the RBR however. 


@AlienMindBender wrote:

I had purchsed my RBK-53 from Costco last month. It was on firmware version 1.4.0.18, and would never find new updates. I had not disabled auto-updates. I began checking into updates, and found a recommendation to go to 2.0.0.74, then follow Netgear's release notes to update to 2.2.1.212 prior to the latest 2.3.1.32 or .44 updates.

 

I updated the satellites, then the router to 2.0.0.74. The administration page showed a small banner that a new firmware was available. I didn't think at the time to disconnect from the Internet, though I'd already downloaded all the necessary firmware packages. I then began the install on one satellite to 2.2.1.212. However, after the update on that first satellite completed, I was not able to reach the router or either satellite for a few minutes. When it finally came back online, the router and both satellites displayed 2.3.1.44.

 

So far, everything seems stable despite the router not following Netgear's own "required" step of going to 2.2.1.212 before the current version. I'll have to monitor and see what changes.


 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM1200 Modem |  Wifi Router Orbi RBK853 (Router Mode), Wired Backhaul and RBK752 | Switches NG GS105/8, GS308v3, GS110MX and XS505M | 

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700

Message 365 of 392
FURRYe38
Guru

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

What device do you have that is this MAC address belongs too? 

[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61


@KingJamesKing wrote:

@FURRYe38 wrote:

You might manually re-load v44, factory reset, then setup again...


@KingJamesKing wrote:

@FURRYe38 wrote:

Hows was your system updated? Auto update or did you manually update with FW files? 

Update and continue or factory reset and setup from scratch after the update? 


@KingJamesKing wrote:

I have been running 2.3.1.44 for a while now and noticing these messages in log. These are coming from Satellite 2 Mac address. Any ideas? 

 

Tuesday, April 09, 2019 10:25:19
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61

 

i have RBR53 one router and two satellites


I manually updated to .32 then it auto updated to .44


 


 



I did the reset on the satellite, poerwed off removed it, powered on with reset pushed. Now instead of one of the messages per day the log records them constantly.

9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 17:59:16
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 17:54:05
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 15:27:17
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 15:12:10
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 14:53:24
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 14:27:14
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 14:14:45
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 13:59:08
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 13:37:41

 


 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM1200 Modem |  Wifi Router Orbi RBK853 (Router Mode), Wired Backhaul and RBK752 | Switches NG GS105/8, GS308v3, GS110MX and XS505M | 

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700

Message 366 of 392
lukpac
Luminary

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44


@FURRYe38 wrote:

What device do you have that is this MAC address belongs too? 

[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61

As noted:

 

@KingJamesKing wrote:

I have been running 2.3.1.44 for a while now and noticing these messages in log. These are coming from Satellite 2 Mac address. Any ideas? 

 

Tuesday, April 09, 2019 10:25:19
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61

 

i have RBR53 one router and two satellites


 

Message 367 of 392
FURRYe38
Guru

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

Lets try a reset ON the RBS and RBR. Walk thru the setup wizard and include adding the RBS during the wizard setup...

 


@KingJamesKing wrote:

@FURRYe38 wrote:

You might manually re-load v44, factory reset, then setup again...


@KingJamesKing wrote:

@FURRYe38 wrote:

Hows was your system updated? Auto update or did you manually update with FW files? 

Update and continue or factory reset and setup from scratch after the update? 


@KingJamesKing wrote:

I have been running 2.3.1.44 for a while now and noticing these messages in log. These are coming from Satellite 2 Mac address. Any ideas? 

 

Tuesday, April 09, 2019 10:25:19
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61

 

i have RBR53 one router and two satellites


I manually updated to .32 then it auto updated to .44


 


 



I did the reset on the satellite, poerwed off removed it, powered on with reset pushed. Now instead of one of the messages per day the log records them constantly.

9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 17:59:16
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 17:54:05
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 15:27:17
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 15:12:10
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 14:53:24
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 14:27:14
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 14:14:45
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 13:59:08
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 13:37:41

 


 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM1200 Modem |  Wifi Router Orbi RBK853 (Router Mode), Wired Backhaul and RBK752 | Switches NG GS105/8, GS308v3, GS110MX and XS505M | 

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700

Message 368 of 392
AlienMindBender
Luminary

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

@FURRYe38 - I had been intending on manually updating, but both RBR and RBS auto updated on their own past .212. Do I need to downgrade the router back to .212, then upgrade to .44 again, or do you think it'll be okay since it was an auto update?
Message 369 of 392
FURRYe38
Guru

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

No, once the RBR is on v212 or v44 no need to downgrade. 

Try the manual v44 FW re-load on both, after each has been re-loaded, factory reset the system then walk thru the setup wizard...

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM1200 Modem |  Wifi Router Orbi RBK853 (Router Mode), Wired Backhaul and RBK752 | Switches NG GS105/8, GS308v3, GS110MX and XS505M | 

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700

Message 370 of 392
KingJamesKing
Luminary

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44


@lukpac wrote:

@FURRYe38 wrote:

What device do you have that is this MAC address belongs too? 

[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61

As noted:

 

@KingJamesKing wrote:

I have been running 2.3.1.44 for a while now and noticing these messages in log. These are coming from Satellite 2 Mac address. Any ideas? 

 

Tuesday, April 09, 2019 10:25:19
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61

 

i have RBR53 one router and two satellites


 


That is the MAC address of the orbi satellite itself

Message 371 of 392
KingJamesKing
Luminary

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44


@FURRYe38 wrote:

Lets try a reset ON the RBS and RBR. Walk thru the setup wizard and include adding the RBS during the wizard setup...

 


@KingJamesKing wrote:

@FURRYe38 wrote:

You might manually re-load v44, factory reset, then setup again...


@KingJamesKing wrote:

@FURRYe38 wrote:

Hows was your system updated? Auto update or did you manually update with FW files? 

Update and continue or factory reset and setup from scratch after the update? 


@KingJamesKing wrote:

I have been running 2.3.1.44 for a while now and noticing these messages in log. These are coming from Satellite 2 Mac address. Any ideas? 

 

Tuesday, April 09, 2019 10:25:19
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61

 

i have RBR53 one router and two satellites


I manually updated to .32 then it auto updated to .44


 


 



I did the reset on the satellite, poerwed off removed it, powered on with reset pushed. Now instead of one of the messages per day the log records them constantly.

9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 17:59:16
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 17:54:05
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 15:27:17
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 15:12:10
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 14:53:24
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 14:27:14
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 14:14:45
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 13:59:08
[WLAN access rejected: incorrect security] from MAC address 9a:3b:ad:17:a8:61, Wednesday, April 17, 2019 13:37:41

 


 


So I believe it solved will wait another 24 hours to see. Somebody said generate new Backhaul password which I did earlier today and so far the log message has stopped. I was getting every 30 min after the factory reset and once a day before.

 

i will report back in a couple days see how goes

Message 372 of 392
FURRYe38
Guru

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

Smiley Wink


@KingJamesKing wrote:

I believe it solved will wait another 24 hours to see. Somebody said generate new Backhaul password which I did earlier today and so far the log message has stopped. I was getting every 30 min after the factory reset and once a day before.

 

i will report back in a couple days see how goes


 

My Setup ISP SparkLight | Internet Cable 1000↓/50↑ CM1200 Modem |  Wifi Router Orbi RBK853 (Router Mode), Wired Backhaul and RBK752 | Switches NG GS105/8, GS308v3, GS110MX and XS505M | 

Additional NG HW: C7800/CAX80/CM1100/CM1200/CM2000, Orbi: CBK40, CBK752, RBK50, RBK853, RBK752, RBK953, SXK30 | NightHawk: R7000, R7800, R7960P, R8000, R8500, RAXE500, RAX50, XR450, EX7500/EX7700

Message 373 of 392
1midniterider
Luminary

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

 Finally took the plunge to .44. I had to factory reset the RBR50 and both RBW30's. However, it took several attempts of resetting one of the RBW30 to finally get it back in the fold. A couple of times it would connect to the RBR50 on 5G, but not allow devices to connect to the Internet. Right now it appears stable using only a single SSID.

Message 374 of 392
jweise
Luminary

Re: New Orbi RBR50/RBS50 Firmware Version 2.3.1.44

Has anyone tried version 2.3.1.48.  It showed up today when I logged in to Orbi.

Message 375 of 392
Top Contributors
Announcements

Orbi WiFi 6E