NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Orbi RBK53 Speed Issue with wired backhaul
Last time I found issue with unstable wireless backhaul. Now I using wirebackhaul. I found the problem. Orbi didn't support gigabit in WAN port or something. I use brigde mode from ISP and use P...
Something to see if that works. Also might see if keeping PPPoE on ISP router, configure RBR for router mode and put the IP address the RBR get from the ISP router in to the ISP routers DMZ and speed test then...
I didn't test it ... and I need ISP to set PPPoE on Router/ONU. ISP block the menu and they will reset to default setting too
If AP mode can work at 900Mbps, How I can fix it if I want PPPoE at Orbi not ONU/ISP Router?
Something to see if that works. Also might see if keeping PPPoE on ISP router, configure RBR for router mode and put the IP address the RBR get from the ISP router in to the ISP routers DMZ and speed test then...
Ok I will try this way ...
Now It works,
- PPPoE on ONU / ISP Router
- Orbi use Router Mode
- Test Speed with Wired - 870-920 Mbps (Up and down)
- Test Speed with Wireless - 4-500 Mbps (Up and down)
But Why I cannot use PPPoE on Orbi to get full speed?
Possible problem in PPPoE handling at the RBR or with the RBR and ISP Modem in bridge mode. Hard to say for sure.
At least its working now for you.