Reply
Highlighted
Aspirant

Orbi jittery with ring central

Ring central voice calls are impossible on my orbi router. 1gb connection, and the calls either jitter or drop.
Message 1 of 6
Highlighted
Guru

Re: Orbi jittery with ring central

What Firmware is currently loaded?
What is the Mfr and model# of the ISP modem the NG router is connected too?
Is the Orbi system operating in Router or AP mode?

What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between them to begin with depending upon building materials when wirelessly connected.

 

What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
What WPA security modes are you using?

 

Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings

 

Try disabling the following and see:
Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Save settings and reboot the router and satellite(s).


@Ridleye wrote:
Ring central voice calls are impossible on my orbi router. 1gb connection, and the calls either jitter or drop.

 


My Setup (Cable 900Mbps/50Mbps)>CAX80(Modem Mode)>RBK853 v3.2.16.6(Router Mode)

Additional NG HW: C7800/CM1100/CM1200/CM2000, Orbi CBK40, RBK853, R7800, R7960P, EX7500/EX7700, XR450 and WNHDE111
Message 2 of 6
Highlighted
Aspirant

Re: Orbi jittery with ring central


@FURRYe38 wrote:

What Firmware is currently loaded?

 

2.3.1.48


What is the Mfr and model# of the ISP modem the NG router is connected too?
Is the Orbi system operating in Router or AP mode?

 

Router Mode

What is the size of your home? Sq Ft?

 

3400


What is the distance between the router and satellite(s)? 30 feet is recommended in between them to begin with depending upon building materials when wirelessly connected.

 

1 Satellite ,~50 ft

 

What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.

 

I'll try that


Any Wifi Neighbors near by? If so, how many?

 

A dozen or so strong signals


What WPA security modes are you using?

WPA2-PSK [AES]

 

Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings

All enabled

 

Try disabling the following and see:
Daisy Chain, Fast Roaming, IPv6 and Set 20/40Mhz Coexistence to 40Mhz only. Save settings and reboot the router and satellite(s).

I'll try

 

THANK YOU

 

 


@Ridleye wrote:
Ring central voice calls are impossible on my orbi router. 1gb connection, and the calls either jitter or drop.

 


 

Message 3 of 6
Highlighted
Guru

Re: Orbi jittery with ring central

What is the Mfr and model# of the ISP modem the NG router is connected too?


My Setup (Cable 900Mbps/50Mbps)>CAX80(Modem Mode)>RBK853 v3.2.16.6(Router Mode)

Additional NG HW: C7800/CM1100/CM1200/CM2000, Orbi CBK40, RBK853, R7800, R7960P, EX7500/EX7700, XR450 and WNHDE111
Message 4 of 6
Highlighted
Aspirant

Re: Orbi jittery with ring central


@FURRYe38 wrote:

What is the Mfr and model# of the ISP modem the NG router is connected too?


Arris CM3200

Model: RBR50|Orbi AC3000 Tri-band WiFi Router
Message 5 of 6
Highlighted
Guru

Re: Orbi jittery with ring central

Also give disabling SIP ALG a try as well:

https://community.netgear.com/t5/Orbi/Wifi-calling-and-Orbi-on-iPhone/m-p/1742342/highlight/false#M6...


My Setup (Cable 900Mbps/50Mbps)>CAX80(Modem Mode)>RBK853 v3.2.16.6(Router Mode)

Additional NG HW: C7800/CM1100/CM1200/CM2000, Orbi CBK40, RBK853, R7800, R7960P, EX7500/EX7700, XR450 and WNHDE111
Message 6 of 6
Top Contributors
Discussion stats
  • 5 replies
  • 671 views
  • 0 kudos
  • 2 in conversation
Announcements