Reply

Orbi log : [Initialized, firmware version: V2.0.0.74]

DCP4971
Guide

Orbi log : [Initialized, firmware version: V2.0.0.74]

I'm continuing to work out what's happening with my Orbi.. Have been having various disconnection issues, which I thought was ISP related, but which seem to have stabilised since applying 2.0.0.74 firmware. However, I'm also seeing fairly regular appearances in the logs saying;

[Initialized, firmware version: V2.0.0.74]

[Internet connected] IP address: 192.168.n.nn (which is the IP address assigned by the cable modem)

This is all at the start of the log at that point, which I think suggests Orbi has restarted - not sure..any thoughts out there?

Cheers

Model: Orbi High-Performance AC3000 Tri-Band WiFi System (RBK50)
Message 1 of 3
moxica
Aspirant

Re: Orbi log : [Initialized, firmware version: V2.0.0.74]

Got the same here. I upgraded after the problematic 1.2.00.18 release but this version also causes my Orbi system to reboot spontaneously at times. Sometimes it works fine for 1 to 2 hours, while at other times it reboots every couple of minutes. I just did a factory reset (again) and reconfigured things again from scratch. I'm only using my Orbi as an access point (not as a router).

Network engineer (Cisco, Foundry, Juniper)
Message 2 of 3
aaz
Virtuoso
Virtuoso

Re: Orbi log : [Initialized, firmware version: V2.0.0.74]


@DCP4971 wrote:

.. I'm also seeing fairly regular appearances in the logs saying;

[Initialized, firmware version: V2.0.0.74]

[Internet connected] IP address: 192.168.n.nn (which is the IP address assigned by the cable modem)

 

..

I guess you are using the Orbi as an AP? 

I am wondering if you have tried Netgear support on this issue. To me if there was nothing that was initiating that reboot like a power fluctuation I would start to think this is a hardware issue.

Message 3 of 3
Top Contributors
Discussion stats
  • 2 replies
  • 1156 views
  • 0 kudos
  • 3 in conversation
Announcements