Reply
Highlighted
Aspirant

Port Forwarding for Tablo Quad

I am trying to set up port foward on my orbi router to lock in the Tablo i have.   The UNPC is not working and I keep having to uncheck and check remote access.  

 

If I send screenshots can someone guide on how to set this up correctly

 

 

Thank you in advance

Model: RBR50|Orbi AC3000 Tri-band WiFi Router
Message 1 of 9
Highlighted
Guru

Re: Port Forwarding for Tablo Quad

What Firmware is currently loaded?
What is the Mfr and model# of the ISP modem the NG router is connected too? Any built in router here by chance?

 

If uPnP is enabled on the RBR, then you may not need any PF configurations. 


@Reith wrote:

I am trying to set up port foward on my orbi router to lock in the Tablo i have.   The UNPC is not working and I keep having to uncheck and check remote access.  

 

If I send screenshots can someone guide on how to set this up correctly

 

 

Thank you in advance


 


My Setup (Cable 900Mbps/50Mbps)>CAX80>XR450 v2.3.2.106(Router Mode)>RBK853 v3.2.11.2(AP Mode)
Additional NG HW: C7800/CM1100/CM1200/CM2000, Orbi CBK40, RBK853, R7800, R7960P,
EX7500/EX7700, XR450 and WNHDE111
Message 2 of 9
Highlighted
Sensei

Re: Port Forwarding for Tablo Quad


@Reith wrote:

I am trying to set up port foward on my orbi router to lock in the Tablo i have.   The UNPC is not working and I keep having to uncheck and check remote access.  


The Tablo User Guide (Chapter 6) seems to have the information required to set up port forwarding, if you think it is necessary.

https://support.tablotv.com/hc/en-us/articles/115005962283-Chapter-6-Tablo-Connect-and-Port-Forwardi... 

I am such a "homebody" that being able to access my DVR from elsewhere isn't relevant.

I love my Orbi.
Message 3 of 9
Highlighted
Aspirant

Re: Port Forwarding for Tablo Quad

My current Orbi firmware is 2.5.0.38

My Modem is Arris TM1602

 

Please see attached screenshot of the error I keep getting

 

Message 4 of 9
Highlighted
Sensei

Re: Port Forwarding for Tablo Quad

I keep forgetting to ask how you administer the Orbi: using the Orbi web interface or using the Orbi "app".

Port forwarding can be set up only using the web interface.

It is on the Advanced Tab->Advanced Setup->Port Forwarding/Port Triggering.  This is described in Chapter 8  of the Orbi User Manual:

http://www.downloads.netgear.com/files/GDC/RBK50/Orbi_UM_EN.pdf 

 

I love my Orbi.
Message 5 of 9
Highlighted
Aspirant

Re: Port Forwarding for Tablo Quad

I know where to go to get to the port forward feature.

What I am asking is based on the attachment I included. How do I set it up?
Message 6 of 9
Highlighted
Sensei

Re: Port Forwarding for Tablo Quad


@Nyirishman1877 wrote:
I know where to go to get to the port forward feature.

Great, navigate to Advanced Tab->Advanced Setup->Port Forwarding. Then,

  • Turn on Port Forwarding
  • Click "Add a Custom Service"
  • Give it a name, such a Quad1
  • Enter the external port information "21308"
  • Uncheck "Use the same internal"
  • Enter the internal port "8887"
  • Enter the IP address of the Quad "128"
  • Click "Apply"
  • Click "Add a Custom Service"
  • Give it another name, such as Quad2
  • Enter the external port information "21307"
  • Uncheck "Use the same Internal"
  • Enter the internal port "80"
  • Enter the IP address of the Quad "128"
  • Click "Apply"

Port forwarding is now set up.  Go back to the Quad, go to the same page, and click "Test.."

 

Good Luck

I love my Orbi.
Message 7 of 9
Highlighted
Aspirant

Re: Port Forwarding for Tablo Quad

It seems to have worked.   I had to turn off UPNP option to get the second quad 2 set up.  Can I turn it back on now?  

 

Also do I leave the Protocol TCP/UDP?

Message 8 of 9
Highlighted
Sensei

Re: Port Forwarding for Tablo Quad

The instructions said "TCP".  Saying "TCP/UDP" is not necessary, but probably does not hurt.  I would follow their dorections.  (Sorry, I got in a hurry and typed before thinking.)

 

UPNP .... beats me.

I love my Orbi.
Message 9 of 9
Top Contributors
Discussion stats
  • 8 replies
  • 728 views
  • 0 kudos
  • 4 in conversation
Announcements