NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RBR20 Assinging 169 ip addess to my sony tv.
Please help. I have an Orbi that is; Assigning a 169. ip address to my sony tv that is 2 years old. This is a random occurance that will last for multiple days and then return to a valid ip address...
jumpinomega wrote:I still worry about the multiple SSID networks that are showing for the one SSID network. ...An issue for another day.
Two I can understand (2.4G and 5G). More than two is harder to explain.
What is the distance between the router and satellite(s)? 30 feet is recommended in between RBR and RBS to begin with depending upon building materials when wirelessly connected. https://kb.netgear.com/000036466/How-far-should-I-place-my-Orbi-satellite-from-my-Orbi-router
- I am only running the main orbi. I do not have the satalite hooked up because the orbi would not recognise it....? Another issue.
- My orbi router is only a few inches from the modem.
- I live in a 1200 sq ft home. All devices seem to receive a good signal from any area of the home.
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
- Which channel would be best? Or does it matter?
Any Wifi Neighbors near by? If so, how many?
- We have 5 neighbors with wifi at the moment.
Try enabling Beamforming and MIMO(MIMO may or maynot be needed) and WMM. Under Advanced Tab/Advanced Settings/Wireless Settings
- Enabled Beamforming and MIMO
- WMM already enabled
Ok,
Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Can you find out what channels there using? Use a pad and wifi analizer to see what channels your neighbors are using on there wifi systems.
Does the TV see the SSID name from the RBR?
May need to get the RBS connected up. Try this at some point...
The RBS needs to be at the same firmware version as the RBR is using.
What you need to do is factory reset the RBS and RBSY. Wire connect a PC to the 1st satellite. Already have the most current FW version files downloaded on to this PC.
Wire connect 1 PC to the back of the RBS. Factory reset the RBS, wait about 5 minute. The PC will get a IP address from the satellite. it will be 192.168.1.250. Use this IP address in a web browser to log in to the satellites web page. Log in as admin and password. Use the satellites web page FW update feature to select the FW update file that was unpacked from the .zip file. Then factory reset and then re-sync the satellites to the RBR.
It looks like my wifi is back up and running on my TV. Not sure what made it talk to the Orbi though.
Thank you for your help today. I greatly appreciate it. Hopefully, the reconfiguations that you recommended have fixed the issue.
I still worry about the multiple SSID networks that are showing for the one SSID network. ...An issue for another day.
Thank you again for your help.
jumpinomega wrote:I still worry about the multiple SSID networks that are showing for the one SSID network. ...An issue for another day.
Two I can understand (2.4G and 5G). More than two is harder to explain.
Hmm, that makes sence for the two SSID names.