NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ssgtweasel
Mar 25, 2020Guide
RBR50 Internet outage - DNS issue
Woke up this morning and not able to access internet. This seems to be intermittent issue for the past few weeks. Besides this morning, this happened maybe a few days ago and then a few times the pre...
FURRYe38
Mar 27, 2020Guru - Experienced User
Can you reset your RBR and setup from scratch, this time don't enable Circle or Armor to see if DNS is stable?
What Firmware version is currently loaded?
What is the Mfr and model# of the ISP modem the NG router is connected too?
Smge1lc wrote:
I too have been having this issue and the common denominator seems to be the DNS. I thought the issue was the priority of my satellites but that solution only worked for a day and I have the same issue. Anyone kill circle? If that the issue? I'll try that.
I've tried the following:
Set mac address to computer
Turn off circle so I can set the DNS to Google only then to start up circle again
Turn off Daisy
Shut off 2 of 4 satellites
The router does say there is an updated firmware available but it will hang when the link is clicked.
ssgtweasel
Mar 27, 2020Guide
Update as of 27 March 2020....
I rebooted the RBR50 last night after work. After rebooting, internet seemed to be not fully functioning…I could ping cnn.com however my sip hardphone wouldn’t register and still confused about that…
After 3 times rebooting, I would get netlogin.net certificate errors on our iphones via wifi. No issue when not using the wifi…I’m still confused what I was getting that…so I ended up resetting to factory defaults and reprogramming from scratch
I did NOT enable parental control/circle/etc
I was able to reset the 2 RBS50s that I have (hardwired)
At this time, everything is functioning well. The iphone using Sprint Wifi calling is now working (as it was intermittent the past week or such)
I can only assume there was some sort of corruption or possible high processor usage (during debug screen, snapshots seemed to be over 85%)
NOTE: I do have the latest firmware