×

Introducing the Orbi 970 Series Mesh System with WiFi 7(BE) technology. For more information visit the NETGEAR Press Room.

Orbi WiFi 7 RBE973
Reply

Re: RBR500 Disconnection issues

Kwai
Aspirant

RBR500 Disconnection issues

After a year of great performance, the Orbi is not staying connected to the modem. Nothing has changed to cause this to happen. It will only reboot successfully if I go on the web page and reboot. Unplugging etc  does not work.  It remains connected for a few hours only. Firmware is updated to v2.2.1.210

Message 1 of 6
FURRYe38
Guru

Re: RBR500 Disconnection issues

What is the Mfr and model# of the ISP modem the NG router is connected too? 

Have you powered OFF the ISP Modem and Orbi router for 1 minute, then powred ON the ISP modem and let it sync then powered ON the Orbi router and let it come to ready? 

 

You might try this as well:

https://community.netgear.com/t5/Orbi/Firmware-2-2-1-210-released-as-of-10-3-18/m-p/1647303/highligh...

Message 2 of 6
ekhalil
Master

Re: RBR500 Disconnection issues


@Kwai wrote:

After a year of great performance, the Orbi is not staying connected to the modem. Nothing has changed to cause this to happen. It will only reboot successfully if I go on the web page and reboot. Unplugging etc  does not work.  It remains connected for a few hours only. Firmware is updated to v2.2.1.210


What wired devices do you have connected to Orbi LAN ports? Any mesh speakers (e.g. Sonos)?

Message 3 of 6
Kwai
Aspirant

Re: RBR500 Disconnection issues

There is nothing wired to the Orbi.

Message 4 of 6
Kwai
Aspirant

Re: RBR500 Disconnection issues

the modem is a Comtrend AR-538tu.  It has been fine for a year. Just restarted everything again, by turning off etc. My firmware is what you listed. 

Message 5 of 6
FURRYe38
Guru

Re: RBR500 Disconnection issues

Is the modem running in router mode or bridged? 

Modem Combo Units:
Couple of options,
1. Configure the modem for transparent bridge mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.
2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.
3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop


@Kwai wrote:

the modem is a Comtrend AR-538tu.  It has been fine for a year. Just restarted everything again, by turning off etc. My firmware is what you listed. 


 

Message 6 of 6
Top Contributors
Discussion stats
  • 5 replies
  • 970 views
  • 0 kudos
  • 3 in conversation
Announcements

Orbi WiFi 7