× Some paid Circle Parental controls customers may be showing free options only. Router firmware correcting this issue will be available ASAP. Visit Status.NETGEAR.com for updates.

Discussion stats
  • 28 replies
  • 2303 views
  • 1 kudo
  • 10 in conversation
Announcements

Top Contributors
Reply
Highlighted
Apprentice

RBW30 - Update Failed

Hello all,

 

I recently updated my RBW30 to v2.3.0.4. I am noticing that its saying it has a firmware update but the update failed. Anyone seeing this?

 

Steve

 

RBW30.png

Model: RBW30| Orbi Wall Plug Satellite
Message 1 of 29
Highlighted
Guru

Re: RBW30 - Update Failed

Are you on Mac or Windows? 

What browser are you using?

https://community.netgear.com/t5/Orbi/RBW30-Firmware-2-3-0-4/td-p/1721905/jump-to/first-unread-messa...


@stevefxp wrote:

Hello all,

 

I recently updated my RBW30 to v2.3.0.4. I am noticing that its saying it has a firmware update but the update failed. Anyone seeing this?

 

Steve

 

RBW30.png


 


My Setup (Cable 900Mbps/50Mbps)>CM1100>Orbi RBK50 v2.5.1.16 and Orbi RBK853 v3.2.11.2(AP Mode)
Additional NG HW: C7800/CM1100/CM1200, Orbi CBK40, Orbi RBK852, R7800, R7960P, EX7500/EX7700, XR450 and WNHDE111
Message 2 of 29
Highlighted
Apprentice

Re: RBW30 - Update Failed

It seems a reboot took care of this!

Message 3 of 29
Highlighted
Guru

Re: RBW30 - Update Failed

Ah good to hear. 

Mark your thread as solved so others will know. 

Enjoy. Smiley Wink


My Setup (Cable 900Mbps/50Mbps)>CM1100>Orbi RBK50 v2.5.1.16 and Orbi RBK853 v3.2.11.2(AP Mode)
Additional NG HW: C7800/CM1100/CM1200, Orbi CBK40, Orbi RBK852, R7800, R7960P, EX7500/EX7700, XR450 and WNHDE111
Message 4 of 29
Highlighted
Aspirant

Re: RBW30 - Update Failed

Screen Shot 2019-03-22 at 9.32.02 AM.png

I'm having the same issue, but a reboot didn't solve things. Rebooted the router and the RBW30 and even did a factory reset on the satellite, but still showing "Update Failed" every time, which is preventing the other devices from auto-updating.

Model: RBW30| Orbi Wall Plug Satellite
Message 5 of 29
Highlighted
Guru

Re: RBW30 - Update Failed

Are you using Mac or Windows PC?

https://community.netgear.com/t5/Orbi/RBW30-Firmware-2-3-0-4/td-p/1721905/jump-to/first-unread-messa...

 

Try manually downloading the FW file for the RBW and apply usnig the Manual Update tab.


@guppybeast wrote:

Screen Shot 2019-03-22 at 9.32.02 AM.png

I'm having the same issue, but a reboot didn't solve things. Rebooted the router and the RBW30 and even did a factory reset on the satellite, but still showing "Update Failed" every time, which is preventing the other devices from auto-updating.


 


My Setup (Cable 900Mbps/50Mbps)>CM1100>Orbi RBK50 v2.5.1.16 and Orbi RBK853 v3.2.11.2(AP Mode)
Additional NG HW: C7800/CM1100/CM1200, Orbi CBK40, Orbi RBK852, R7800, R7960P, EX7500/EX7700, XR450 and WNHDE111
Message 6 of 29
Highlighted
Prodigy

Re: RBW30 - Update Failed

You may also want to power off the satellite you are having issues with, update the remaining ones, and then repower the satellite to see if that allows you to update the firmware.

---------------
My Equipment: Cox Cable (350Mb/35Mb), Orbi AX6000 (RBR850, RBS850), w/2 x RBS50) (Wired backhaul), NG GS116PP Gigabit Smart Switch, Synology DS1019+ NAS
Message 7 of 29
Highlighted
Aspirant

RBR50 constantly showing white led. Need help

Early morning my orbi was still ok. Was still able to access internet. All of the sudden the internet got cut off and orbi jus shows steady white light at the top. I tried resetting, restarting but still steady white. I tried following instructions to manually load fw using tftp64 but im stuck when i turn off the router then turn on after 10s i did not get any orange power LED and no flashing. Im stuxk right now
Message 8 of 29
Highlighted
Aspirant

Re: RBW30 - Update Failed

I'm on Windows - 2.3.0.4 is already installed and working fine - it just seems to think there's an additional update that is failing. I don't see anywhere to download that - if I go to the RBW30 support page, 2.3.0.4 is the latest firmware posted

Message 9 of 29
Highlighted
Aspirant

Re: RBW30 - Update Failed

I have the same issue; I get the status that the firmware update failed.  Do I need to downgrade to a previous vesion to resolve this?

 

Regards,

 

Jerry Servidio

Model: RBW30| Orbi Wall Plug Satellite
Message 10 of 29
Highlighted
Aspirant

Re: RBW30 - Update Failed

I disconnected the RBW30 (unplugged it) and was able to auto-update the firmware on my RBR50 and RBS50 to 2.3.1.44, but after plugging the RBW30 back in, it still shows a current firmware of 2.3.0.4 and "Update failed" as the status

Model: RBW30| Orbi Wall Plug Satellite
Message 11 of 29
Highlighted
Aspirant

Re: RBW30 - Update Failed

Same issue here- every device is on the latest firmware.  I have 2 RBW30 satellites which always try to download the firmware and then report the update has failed. I believe the system does not recognize that they are already updated or something.  Al 4 orbi devices were manually updated as none of them would auto update.

 

powered both RBW30s down, rebooted main router, reinstalled current firmware but the issue is still occurring.  

Message 12 of 29
Highlighted
Aspirant

Re: RBW30 - Update Failed

I am encountering the same failure message on the RBW30. I have power cycled the RBW30 and also tried rebooting all of my Orbis (RBK50) and it still fails. I also tried manually updating the firmware again. Strange.

Message 13 of 29
Highlighted
Guru

Re: RBW30 - Update Failed

Are you using Mac or PC? 

https://community.netgear.com/t5/Orbi/RBW30-Firmware-2-3-0-4/td-p/1721905/jump-to/first-unread-messa...



 


My Setup (Cable 900Mbps/50Mbps)>CM1100>Orbi RBK50 v2.5.1.16 and Orbi RBK853 v3.2.11.2(AP Mode)
Additional NG HW: C7800/CM1100/CM1200, Orbi CBK40, Orbi RBK852, R7800, R7960P, EX7500/EX7700, XR450 and WNHDE111
Message 14 of 29
Highlighted
Aspirant

Re: RBW30 - Update Failed

I am using macOS Mojave.

Message 15 of 29
Highlighted
Guru

Re: RBW30 - Update Failed

Ok, seeing issues on Mac. You don't have a windows PC by chance? 


@GT0113 wrote:

I am using macOS Mojave.


@Blanca_O 


My Setup (Cable 900Mbps/50Mbps)>CM1100>Orbi RBK50 v2.5.1.16 and Orbi RBK853 v3.2.11.2(AP Mode)
Additional NG HW: C7800/CM1100/CM1200, Orbi CBK40, Orbi RBK852, R7800, R7960P, EX7500/EX7700, XR450 and WNHDE111
Message 16 of 29
Highlighted
Aspirant

Re: RBW30 - Update Failed

I just tried from a Windows 7 machine using IE 11 and have the exact same behavior - Update failed. The RBW30's firmware is currently at V2.3.0.4.

Message 17 of 29
Highlighted
Guru

Re: RBW30 - Update Failed

Ok, I believe it's updated to the latest then. 

 

I would factory reset it and setup from scratch...


@GT0113 wrote:

I just tried from a Windows 7 machine using IE 11 and have the exact same behavior - Update failed. The RBW30's firmware is currently at V2.3.0.4.


 


My Setup (Cable 900Mbps/50Mbps)>CM1100>Orbi RBK50 v2.5.1.16 and Orbi RBK853 v3.2.11.2(AP Mode)
Additional NG HW: C7800/CM1100/CM1200, Orbi CBK40, Orbi RBK852, R7800, R7960P, EX7500/EX7700, XR450 and WNHDE111
Message 18 of 29
Highlighted
Aspirant

Re: RBW30 - Update Failed

Hi,

I have the exact same issue. My RBR50 and RBS50s can update fine but the update is not going through due to RBW30. This is a recently factory reset unit after I upgraded to 2.3 firmware and I don't wish to do this again as I believe the issue is that it is failing to download the update file somewhere rather than a problem with the firmware itself. I have tried both from OSX and Windows (not that it would make a difference). One for Netgear to resolve I guess.

Andrew.

Message 19 of 29
Highlighted
Guru

Re: RBW30 - Update Failed

Are you trying to apply the FW update thru the Orbi or thru the RBWs web page? 

 

What versions currently loaded on the RBW? Besure you factory reset and setup again to be sure the FW did update or didn't and try again from Windows. Try using IE11 or FF browsers. 

https://community.netgear.com/t5/Orbi/Firmware-update-for-RBK33-Mac-OS-High-Sierra-not-working-V2-3-...


@adhodgson wrote:

Hi,

I have the exact same issue. My RBR50 and RBS50s can update fine but the update is not going through due to RBW30. This is a recently factory reset unit after I upgraded to 2.3 firmware and I don't wish to do this again as I believe the issue is that it is failing to download the update file somewhere rather than a problem with the firmware itself. I have tried both from OSX and Windows (not that it would make a difference). One for Netgear to resolve I guess.

Andrew.


 


My Setup (Cable 900Mbps/50Mbps)>CM1100>Orbi RBK50 v2.5.1.16 and Orbi RBK853 v3.2.11.2(AP Mode)
Additional NG HW: C7800/CM1100/CM1200, Orbi CBK40, Orbi RBK852, R7800, R7960P, EX7500/EX7700, XR450 and WNHDE111
Message 20 of 29
Highlighted
Aspirant

Re: RBW30 - Update Failed

Hi,

When I woke this morning I got a notification on my phone that my Orbi had automatically updated. When I quickly checked before leaving for work the RBR50 and 2 RBS50s had upgraded to 2.3.1.44 but the RBW30 was still on 2.3.0.4 firmware. It all seems fine and not sure whether Netgear did anything at their end to pull the firmware metadata from the RBW30, I will check the upgrade status on the Orbi web page later this evening when I get home. To answer the question about whether I did this from the Orbi webpage or manual upgrade, as the upgrade files don't appear to be on the Netgear website I can only do this via the Orbi interface (I primarily use the web pages but have the app installed as well just for giggles).

Thanks.
Andrew.

Message 21 of 29
Highlighted
Guru

Re: RBW30 - Update Failed

.4 is the latest for the RBW. 

 

Let us know how it goes for you. You should be good. 

I would do a backup of the configuration to file ON the RBR. 


@adhodgson wrote:

Hi,

When I woke this morning I got a notification on my phone that my Orbi had automatically updated. When I quickly checked before leaving for work the RBR50 and 2 RBS50s had upgraded to 2.3.1.44 but the RBW30 was still on 2.3.0.4 firmware. It all seems fine and not sure whether Netgear did anything at their end to pull the firmware metadata from the RBW30, I will check the upgrade status on the Orbi web page later this evening when I get home. To answer the question about whether I did this from the Orbi webpage or manual upgrade, as the upgrade files don't appear to be on the Netgear website I can only do this via the Orbi interface (I primarily use the web pages but have the app installed as well just for giggles).

Thanks.
Andrew.


 


My Setup (Cable 900Mbps/50Mbps)>CM1100>Orbi RBK50 v2.5.1.16 and Orbi RBK853 v3.2.11.2(AP Mode)
Additional NG HW: C7800/CM1100/CM1200, Orbi CBK40, Orbi RBK852, R7800, R7960P, EX7500/EX7700, XR450 and WNHDE111
Message 22 of 29
Highlighted
Aspirant

Re: RBW30 - Update Failed

I noticed today when I checked for a firmware update, I now see the following:

 

Screen Shot 2019-03-28 at 10.10.45 PM.png

 

Model: RBK50| Orbi AC3000 High-Performance Tri-Band WiFi System, RBW30| Orbi Wall Plug Satellite
Message 23 of 29
Highlighted
Guru

Re: RBW30 - Update Failed

Thats great. You have the latest FW for your devices. 

Enjoy. Smiley Wink


@grservidio wrote:

I noticed today when I checked for a firmware update, I now see the following:

 

Screen Shot 2019-03-28 at 10.10.45 PM.png

 


 


My Setup (Cable 900Mbps/50Mbps)>CM1100>Orbi RBK50 v2.5.1.16 and Orbi RBK853 v3.2.11.2(AP Mode)
Additional NG HW: C7800/CM1100/CM1200, Orbi CBK40, Orbi RBK852, R7800, R7960P, EX7500/EX7700, XR450 and WNHDE111
Message 24 of 29
Highlighted
NETGEAR Moderator

Re: RBW30 - Update Failed

Hi @zorlan @guppybeast @GT0113

 

Were you able to update the firmware this time? 


Regards, 
Blanca 
Community Team

Message 25 of 29