NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Speeds have plummeted after latest update.
New to Orbi and have been delighted with its speed. I have 500 internet and all over the house was getting very fast speeds and always without exception full upload speed of 35. As soon as I’ve u...
Try a factory reset and setup from scratch if you see this problem again after updarting FW. Some have not done this and not given a full reset and setup a try. it does work and helps in these cases where users upgrade and see bad behavoir. I know a reset shouldn't be main stream however for some cases, it needs to be give a chance. I saw no speed loss after upgrade to v38 and had great operation. However I alwaya manually update and factory reset and start out fresh. Just works. Others as well:
https://kb.netgear.com/31486/How-do-I-reset-my-Orbi-system-to-factory-default-settings
https://www.youtube.com/watch?v=ePZSc7vnRlQ
Good Luck.
Wakey wrote:New to Orbi and have been delighted with its speed. I have 500 internet and all over the house was getting very fast speeds and always without exception full upload speed of 35.
As soon as I’ve updated the firmware it has plummeted in speed. You can see the exact moment my firmware was updated on the Speedtest history, and even upload speed seems halved.
How can Netgear release a firmware update that trashes the product?
Any ideas. I bought this system as consumer friendly with no rigmarole, will resetting it and all the hassle that requires even work? Why should you have to do that?
I see others are reporting similar issues and resetting did not work for them and they have rolled back the firmware. I have no idea how to do this and only use the app- my web browsers (Chrome and Safari) cannot for some reason connect to it on my Mac (could not when I bought it a few weeks ago).
Very sad as I had a great system, now it is trash.
Thanks everyone.
I didn’t check any log, but it slowed when the new firmware was installed, and went back to how it was when I rolled it back, so it seems to be the firmware. It also seems to be the firmware on the satellites from the fact it went back to what it was when the satellites were rolled back before the router itself. Router has always showed 500+ speed when doing a speedtest on it even after the dubious new firmware was installed, so it was either the backhaul or the wireless performance that was degrading under new firmware.
I’ve seen a lot of reports across the internet of the same thing, so for some reason this firmware is affecting a lot of people. Have you got a very fast internet connection of plus 200 because the reports seem to be coming from those people?
Hi again Wakey . Yes, I understand. But you attribute the performance loss directly to Netgear's latest firmware; and although this be indeed be the case, one would think that ALL users would be experiencing the same thing; which I do not believe to be the case. The reason I was asking if you checked your Admin log is to see if, by any chance, you may have been bombarded with DoS attacks which can bring any network down to crawling speed and even bring the network down competely. Not every time, but I've had many instances of performance degradation; and upon checking the router's Admin log, I would find hundreds of DOS records. But I am no expert in the field, far from it. Just thought I'd pass it on any way.
You guys are insane if you think a factory reset after every firmware update is the answer. I have better things to do.
I ran my RBK50 for over 5 days and saw no slow down in speeds, wired or wireless, from RBR or RBS with v38 loaded. Others who have reported having issues after the FW update were able to get there systems up and runing after a factory reset. Haven't see a ton of loss in speeds being reported other than bad experiences before the reset and naming of devices which NG is aware of. There maybe other outstanding issues that maybe causing your speed to slow down other than it just being FW.
IF your back up and running again then then all that matters. I would check next time when a FW update is available, download the files and manually install them to the RBS then RBR and then factory reset and setup from scratch. Save a new backup configuration to file for safe keeping. You can even factory reset and re-load a backup configuration from file to save time should a reset be needed.
Good Luck.
Wakey wrote:I didn’t check any log, but it slowed when the new firmware was installed, and went back to how it was when I rolled it back, so it seems to be the firmware. It also seems to be the firmware on the satellites from the fact it went back to what it was when the satellites were rolled back before the router itself. Router has always showed 500+ speed when doing a speedtest on it even after the dubious new firmware was installed, so it was either the backhaul or the wireless performance that was degrading under new firmware.
I’ve seen a lot of reports across the internet of the same thing, so for some reason this firmware is affecting a lot of people. Have you got a very fast internet connection of plus 200 because the reports seem to be coming from those people?
Wakey wrote:I didn’t check any log, but it slowed when the new firmware was installed, and went back to how it was when I rolled it back, so it seems to be the firmware. It also seems to be the firmware on the satellites from the fact it went back to what it was when the satellites were rolled back before the router itself. Router has always showed 500+ speed when doing a speedtest on it even after the dubious new firmware was installed, so it was either the backhaul or the wireless performance that was degrading under new firmware.
I’ve seen a lot of reports across the internet of the same thing, so for some reason this firmware is affecting a lot of people. Have you got a very fast internet connection of plus 200 because the reports seem to be coming from those people?
FURRYe38 wrote:I ran my RBK50 for over 5 days and saw no slow down in speeds, wired or wireless, from RBR or RBS with v38 loaded. Others who have reported having issues after the FW update were able to get there systems up and runing after a factory reset.
You conveniently left out the huge group who reverted/rolled back their firmware and saw great results.