Reply

Auto negotiate 2.5Gbe

ghost_zl1
Star

Auto negotiate 2.5Gbe

I have two separate 2.5Gbe adapters that only auto negotiate at 1Gbp speeds with this switch.  Is this switch not able to run at that speed or is there a trick to get it to negotiate at a higher speed?  I have confirmed that both adapaters will negotiate at 2.5Gbps when connected to a Netgear GS810EMX.

Model: XS708T|8-Port 10-Gigabit Copper Smart Managed Pro Switch with 2 Copper/SFP+ Combo Ports
Message 1 of 2

Accepted Solutions
schumaku
Guru

Re: Auto negotiate 2.5Gbe

By far not every 10G port can do MultiGig - e.g. all the Netgear XS712T, XS708T, XS712Tv2, XS716T, XS728T, XS748T or XS708E, XS708Ev2, XS716E support 10GbE and 1 GbE only (and no 100 Mb/s Fast Ethernet, too). Only the XS724EM does MultiGig. Check the product data sheets FMI.

 

 

View solution in original post

Message 2 of 2

All Replies
schumaku
Guru

Re: Auto negotiate 2.5Gbe

By far not every 10G port can do MultiGig - e.g. all the Netgear XS712T, XS708T, XS712Tv2, XS716T, XS728T, XS748T or XS708E, XS708Ev2, XS716E support 10GbE and 1 GbE only (and no 100 Mb/s Fast Ethernet, too). Only the XS724EM does MultiGig. Check the product data sheets FMI.

 

 

Message 2 of 2
Top Contributors
Discussion stats
  • 1 reply
  • 1672 views
  • 0 kudos
  • 2 in conversation
Announcements